Bedienungsanleitung Pioneer AVH-X8800BT (Seite 5 von 60) (Englisch)

649256

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

prohibited.” will appear on the screen. To watch video image

on this display, stop the vehicle in a safe place and apply the

handbrake. Please keep the brake pedal pushed down before

releasing the handbrake.

When using a display con-

nected to V OUT

The video output terminal (V OUT) is for connection of a display

to enable passengers in the rear seats to watch video images.

WARNING

NEVER install the rear display in a location that enables the

driver to watch video images while driving.

To avoid battery exhaustion

Be sure to run the vehicle engine while using this product. Using

this product without running the engine can drain the battery.

WARNING

Do not install this product in a vehicle that does not have an

ACC wire or circuitry available.

Rear view camera

With an optional rear view camera, you are able to use this

product as an aid to keep an eye on trailers, or backing into a

tight parking spot.

WARNING

 SCREEN IMAGE MAY APPEAR REVERSED.

 USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE

REAR VIEW CAMERA. OTHER USE MAY RESULT IN

INJURY OR DAMAGE.

CAUTION

 For safety reasons, the rear view camera function is not

available until this product boots up completely.



The rear view mode is to use this product as an aid to keep

an eye on the trailers, or while backing up. Do not use this

function for entertainment purposes.

Handling the SD card slot

CAUTION

 Keep the SD memory card out of the reach of small

children to prevent them from accidentally swallowing it.



To prevent data loss and damage to the storage device,

never remove it from this product while data is being

transferred.



If data loss or corruption occurs on the storage device for

any reason, it is usually not possible to recover the data.

Pioneer accepts no liability for damages, costs or expenses

arising from data loss or corruption.



Never insert or eject an SD memory card while driving.

Handling the USB connector

 To prevent data loss and damage to the storage device,

never remove it from this product while data is being

transferred.



Pioneer cannot guarantee compatibility with all USB mass

storage devices and assumes no responsibility for any loss

of data on media players, iPhone, smartphone, or other

devices while using this product.

Visit our website

Visit us at the following site:

http://www.pioneer.eu



chase on file to help you refer to this information in the event

of an insurance claim such as loss or theft.



We offer the latest information about PIONEER

CORPORATION on our website.



Pioneer regularly provides software updates to further

improve it’s products. Please check the support section of

the Pioneer website for all available software updates.

Protecting the LCD panel and

screen

 Do not expose the LCD screen to direct sunlight when this

product is not used. This may result in LCD screen malfunc-

tion due to the resulting high temperatures.



When using a mobile phone, keep the aerial of the mobile

phone away from the LCD screen to prevent disruption of the

video in the form of spots, coloured stripes, etc.



To protect the LCD screen from damage, be sure to touch the

touch panel keys only with your finger and do so gently.

Notes on internal memory

Before removing the vehicle battery

If the battery is disconnected or discharged, the memory will be

erased and must be reprogrammed.



Some of the settings and recorded contents will not be reset.

Data subject to erasure

The information is erased by disconnecting the yellow lead from

the battery (or removing the battery itself).



Some of the settings and recorded contents will not be reset.

Resetting the microprocessor

CAUTION

Pressing the RESET button resets settings and recorded

contents to the factory settings.

—

Do not perform this operation when a device is connected

to this product.

—

Some of the settings and recorded contents will not be

reset.

The microprocessor must be reset under the following

conditions:



Prior to using this product for the first time after installation.

 If this product fails to operate properly.

 If there appears to be problems with the operation of the

system.



If your vehicle position is shown on the map with a signifi-

cant positioning error.

1 Turn the ignition switch OFF.

2 Press the RESET button with a pen tip or other

pointed implement.

 Refer to Checking part names and functions on page 6

Settings and recorded contents are reset to the factory settings.

About this manual

This manual uses diagrams of actual screens to describe oper-

ations. However, the screens on some products may not match

those shown in this manual depending on the model used.

< CRB4770-A >

Precaution

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8800BT Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info