Bedienungsanleitung Pioneer AVH-X8800BT (Seite 42 von 60) (Englisch)

649256

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Adjusting the cutoff frequency

value

You can adjust the cutoff frequency value of each speaker.

The following speakers can be adjusted:

Front, Rear, Subwoofer

“Rear” is available only when “Rear Speaker” is set to “On”.



Refer to Setting the rear speaker output on page 41

“Subwoofer” is available only when “Subwoofer” is set to

“On”.



Refer to Setting the subwoofer output on page 41

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

2 Touch [Crossover] or [Subwoofer Settings].

3 Touch [<] or [>] to switch the speaker.

4 Drag the graph line to set the cutoff position.

5 Drag the lowest point of the graph to set the

cutoff slope.

p The following items can also be set.



⁂⁚⁓⁥⁗

Switches the subwoofer phase between normal and reverse

position.



LPF/HPF:

Switches the LPF/HPF setting to “On” or “Off”.

When it is turned off, the high-pass filter or low-pass filter of

each speaker can also be turned on by touching the graph

lines.

Selecting the listening position

You can select a listening position that you want to make as the

centre of sound effects.

The default setting is “Off”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

2 Touch [Listening Position].

3 Touch the desired position to change the lis-

tening position.

The following items are available:

Off, Front-L, Front-R, Front, All.

Adjusting the speaker output

levels nely

Fine adjustments of the speaker output level can be made by

listening to audio output.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

2 Touch [Speaker Level].

3 Touch [<] or [>] to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

The default setting is “Off”.

If you change the setting for the listening position, the

output levels of all the speakers will change according to the

setting.

4 Touch [<] or [>] to adjust the speaker output

level.

p “–24” dB to “10” dB is displayed as the level to be corrected

is increased or decreased.

The following items are available:

Front Left, Front Right, Rear Left, Rear Right, Subwoofer

If the Auto EQ measurement has been done, the result of the

Auto EQ measurement will be applied by touching [Apply

Auto EQ] (the results are also applied to some settings

simultaneously).

Adjusting the time alignment

By adjusting the distance from each speaker to the listening

position, time alignment is able to correct the time required for

sound to reach the listening position.

1 Measure the distance between the head of the

listener and each speaker unit.

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

3 Touch [Time Alignment].

4 Touch [<] or [>] to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

The default setting is “Off”.

If you change the listening position setting, the distance

value of all the speakers will change in conjunction with the

setting.

5 Touch [<] or [>] to input the distance between

the selected speaker and the listening position.

The following items are available:

Front Left, Front Right, Rear Left, Rear Right, Subwoofer

You can input the value between 0 cm and 500 cm.

p The distance can be adjusted manually only when the listen-

ing position setting is set to “Front-L” or “Front-R”.

If the Auto EQ measurement has been done, the result of the

Auto EQ measurement will be applied by touching [Apply

Auto EQ] (the results are also applied to some settings

simultaneously).

 If you touch [TA On], the time alignment is turned

off mandatorily.

Using the equaliser

Recalling equaliser curves

There are multiple equalizer curves that you can easily recall at

any time. The equalizer curves you can recall are as follows:

S.Bass, Powerful, Natural, Vocal, Flat, Custom1 and Custom2

The default setting is “Powerful”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

2 Touch [Graphic EQ].

3 Touch the equalizer curve name.

Customising the equaliser curves

p If the preset equalizer curve other than “Custom1” or

“Custom2” is modified, the equalizer curve settings in

“Custom1” will be overwritten.

If the equalizer curve stored in “Custom1” or “Custom2” is

modified, each stored curve will be overwritten.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 41

2 Touch [Graphic EQ].

3 Select a curve that you want to use as the basis

of customising.

4 Touch the frequency for which you want to

adjust the level.

p If you touch “Custom1” or “Custom2”, recall the equalizer

curve currently stored in “Custom1” or “Custom2”.

< CRB4770-A >

Audio adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8800BT Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info