Bedienungsanleitung Pioneer AVH-X8800BT (Seite 52 von 60) (Englisch)

649256

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

iPod

Error-02-6X/-9X/-DX



iPod failure.

— Disconnect the cable from the iPod. Once the iPod’s main

menu is displayed, reconnect the iPod and reset it.

Error-02-67



The iPod firmware version is old.

— Update the iPod version.

iTunes tagging

Error-8D



Built-in FLASH ROM encountered an error.

— Turn the ignition switch to OFF and then to ON.

Tag store failed.



Tag information cannot be stored in this product.

— Try again.

Already stored.



This tag information is already stored in memory.

— Tag information can only be saved once for any given

song. Tag information cannot be saved for the same song

more than once.

Memory full. Connect iPod.



The tag information is successfully stored. The flash memory

of this product has become full.

— The tag information on this product is transferred to the

iPod automatically when an iPod is connected.

Memory full. Tags not stored. Connect iPod.



This product’s flash memory used as the temporary storage

area is full.

— The tag information on this product is transferred to the

iPod automatically when an iPod is connected.

iPod full. Tags not transferred.



Memory used for tag information on the iPod is full.

— Synchronize the iPod with iTunes and clean up the tagged

playlist.

Tag transfer failed. Reconnect your iPod.



This product’s tag information cannot transfer to the iPod.

— Check the iPod and try again.

Apple CarPlay

Attempting to connect to Apple CarPlay.



Communication failed and the system is trying to connect.

 Wait for a while. Then, perform the actions below if the error

message is still displayed.

— Restart the iPhone.

— Disconnect the cable from the iPhone, and then connect

the iPhone again after a few seconds.

— Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the

above action, please contact your dealer or an authorised

Pioneer Service Station.

Bluetooth

Error-10



The power failed for the Bluetooth module of this product.

— Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the

above action, please contact your dealer or an authorised

Pioneer Service Station.

Android Auto

Android Auto has stopped.



The connected device is not compatible with Android Auto.

— Check if the device is compatible with Android Auto.



The startup of Android Auto failed for some reasons.

— Disconnect the cable from the smartphone, and then

connect the smartphone again after a few seconds.

— Restart the smartphone.

— Turn the ignition switch to OFF and then to ON.

If the error message is still displayed after performing the

above action, please contact your dealer or an authorised

Pioneer Service Station.



The time set in this product is not correct.

— Check if GPS signals are received and the time is correctly

set.

Bluetooth pairing failed. Please pair your Android phone

manually.



The Bluetooth pairing failed for some reasons.

— Pair this product with the device manually.

Android Auto cannot connect right now. When safe to do

so, please check your Android phone.



The default settings are displayed on the screen of the

Android Auto-compatible device or images are not output

from the Android Auto-compatible device.

— Park your vehicle in a safe place, and follow the instruc-

tions displayed on the screen. If the error message is

still displayed after performing a on-screen instructions,

please reconnect the device.

Handling and care of discs

Some basic precautions are necessary when handling your

discs.

Built-in drive and care

 Use only conventional, fully circular discs. Do not use

shaped discs.



Do not use cracked, chipped, warped, or otherwise damaged

discs as they may damage the built-in drive.



Use 12-cm discs. Do not use 8-cm discs or an adapter for

8-cm discs.



When using discs that can be printed on label surfaces,

check the instructions and the warnings of the discs.

Depending on the discs, inserting and ejecting may not be

possible. Using such discs may result in damage to this

equipment.



Do not attach labels, write on or apply chemicals to the

surface of the discs.



Do not attach commercially available labels or other materi-

als to the discs.



To clean a disc, wipe it with a soft cloth, moving outward

from the centre.



Condensation may temporarily impair the built-in drive’s

performance.



Playback of discs may not be possible because of disc

characteristics, disc format, recorded application, playback

environment, storage conditions and so on.



Road shocks may interrupt disc playback.

 Read the precautions for discs before using them.

< CRB4770-A >

Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8800BT Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info