Bedienungsanleitung Pioneer AVIC-F3210BT (Seite 116 von 148) (Englisch)

454854

116

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Setting the rear output and

subwoofer controller

The navigation system’s rear output can be

used for a full-range speaker or subwoofer

connection. If you switch S/W Control to

Rear SP:S/W, you can connect a rear speaker

lead directly to a subwoofer without using an

auxiliary amp.

Initially, the navigation system is set for a rear

full-range speaker connection

(Rear SP:F.Range).

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting. (When you use the product

without RCA rear output, this setting only

applies to the rear speaker leads.)

1 Display the “Initial Setting” screen.

= For details, refer to Displaying the

“Initial Setting” screen on page 114.

2 Turn MULTI-CONTROL to select “S/W

Control”.

3 Press the centre of MULTI-CONTROL to

switch between “Rear SP:F.Range” and

“Rear SP:S/W”.

When no subwoofer is connected to the rear

speaker leads directly, select

“Rear SP:F.Range” and proceed to the next op-

eration.

When a subwoofer is connected to the rear

speaker leads directly, select “Rear SP:S/W”

and finish the setting.

4 Turn MULTI-CONTROL to select “Pre-

out”.

5 Press the centre of MULTI-CONTROL to

switch between “Subwoofer” and “Rear”.

When no subwoofer is connected or you want

to control the subwoofer sound with the exter-

nal amplifier, select “Rear”.

When a subwoofer is connected to the RCA

output, select “Subwoofer”.

Switching the sound

muting/attenuation

You can select the muting method when the

voice guidance is output.

p When you use a mobile phone connected

with Bluetooth technology (dialling, talking,

incoming call), the audio source volume is

always muted independently of this setting.

1 Display the “Initial Setting” screen.

= For details, refer to Displaying the

“Initial Setting” screen on page 114.

2 Turn MULTI-CONTROL to select

“Guidance”.

3 Press the centre of MULTI-CONTROL re-

peatedly until the desired setting appears

in the display.

Each press of MULTI-CONTROL changes the

settings as follows:

! ATT:

The audio source is attenuated automati-

cally when the voice guidance is output.

! Mute:

The audio source is muted automatically

when the voice guidance is output.

! Normal:

The audio source volume does not change.

p AV source volume returns to normal when

the corresponding action is ended.

Displaying the

“Audio Menu” screen

To customise the audio settings, display the

“Audio Menu” screen.

1 Press the MODE button when the map

of the current location is displayed.

The audio operation screen appears.

2 Press the centre of MULTI-CONTROL to

display the function select screen.

= For details, refer to Switching the audio

source on page 77.

Engb

116

Chapter

Customising preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-F3210BT Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-F3210BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info