Bedienungsanleitung Pioneer AVIC-F50BT (Seite 195 von 208) (Englisch)

528288

195

Zoom out

Zoom in

Vorherige Seite

1/208

Nächste Seite

Black plate (195,1)

MHL

MHL, the MHL Logo, and Mobile High-Definition

Link are trademarks or registered trademarks of

MHL, LLC in the United States and other

countries.

Using the LCD screen correctly

Handling the LCD screen

! When the LCD screen is subjected to direct

sunlight for a long period of time, it will be-

come very hot, resulting in possible da-

mage to the LCD screen. When not using

this navigation system, avoid exposing it to

direct sunlight as much as possible.

! The LCD screen should be used within the

temperature ranges shown in Specifica-

tions.

! Do not use the LCD screen at temperatures

higher or lower than the operating tem-

perature range, because the LCD screen

may not operate normally and could be da-

maged.

! The LCD screen is exposed in order to in-

crease its visibility within the vehicle.

Please do not press strongly on it as this

may damage it.

! Do not push the LCD screen with excessive

force as this may scratch it.

! Never touch the LCD screen with anything

besides your finger when operating the

touch panel functions. The LCD screen can

scratch easily.

Liquid crystal display (LCD) screen

! If the LCD screen is near the vent of an air

conditioner, make sure that air from the air

conditioner is not blowing on it. Heat from

the heater may break the LCD screen, and

cool air from the cooler may cause moist-

ure to form inside the navigation unit, re-

sulting in possible damage.

! Small black dots or white dots (bright dots)

may appear on the LCD screen. These are

due to the characteristics of the LCD

screen and do not indicate a malfunction.

! The LCD screen will be difficult to see if it is

exposed to direct sunlight.

! When using a mobile phone, keep the aer-

ial of the mobile phone away from the LCD

screen to prevent disruption of the video in

the form of disturbances such as spots or

coloured stripes.

Maintaining the LCD screen

! When removing dust from the LCD screen

or cleaning it, first turn the system power

off, then wipe with a soft dry cloth.

! When wiping the LCD screen, take care not

to scratch the surface. Do not use harsh or

abrasive chemical cleaners.

LED (light-emitting diode)

backlight

A light emitting diode is used inside the dis-

play to illuminate the LCD screen.

! At low temperatures, using the LED back-

light may increase image lag and degrade

the image quality because of the character-

istics of the LCD screen. Image quality will

improve with an increase in temperature.

! The product lifetime of the LED backlight is

more than 10 000 hours. However, it may

decrease if used in high temperatures.

! If the LED backlight reaches the end of its

product lifetime, the screen will become

dimmer and the image will no longer be

visible. In that case, please consult your

dealer or the nearest authorised Pioneer

Ser vice Station.

<CRB4228-A>195

Engb

195

Appendix

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-F50BT Seite 195

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-F50BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info