649250

Pioneer AVIC-F80DAB Seite 64

64
Zoom out
Zoom in
Vorherige Seite
1/87
Nächste Seite
64
Adjusting the speaker output
levels nely
Fine adjustments of the speaker output level can be made by
listening to audio output.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 63
2 Touch [Speaker Level].
3 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
Off, Front-L, Front-R, Front, All.
p
The default setting is “Off”.
p
If you change the setting for the listening position, the
output levels of all the speakers will change according to the
setting.
4 Touch [<] or [>] to adjust the speaker output
level.
p “–24” dB to “10” dB is displayed as the level to be corrected
is increased or decreased.
The following items are available:
Front Left, Front Right, Rear Left, Rear Right, Subwoofer
p
If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [Apply
Auto EQ] (the results are also applied to some settings
simultaneously).
Adjusting the time alignment
By adjusting the distance from each speaker to the listening
position, time alignment is able to correct the time required for
sound to reach the listening position.
1 Measure the distance between the head of the
listener and each speaker unit.
2 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 63
3 Touch [Time Alignment].
4 Touch [<] or [>] to select the listening position
if necessary.
The following items are available:
Off, Front-L, Front-R, Front, All.
p
The default setting is “Off”.
p
If you change the listening position setting, the distance
value of all the speakers will change in conjunction with the
setting.
5 Touch [<] or [>] to input the distance between
the selected speaker and the listening position.
The following items are available:
Front Left, Front Right, Rear Left, Rear Right, Subwoofer
p
You can input the value between 0 cm and 500 cm.
p The distance can be adjusted manually only when the listen-
ing position setting is set to “Front-L” or “Front-R”.
p
If the Auto EQ measurement has been done, the result of the
Auto EQ measurement will be applied by touching [Apply
Auto EQ] (the results are also applied to some settings
simultaneously).
If you touch [TA On], the time alignment is turned
off mandatorily.
Using the equaliser
Recalling equaliser curves
There are multiple equalizer curves that you can easily recall at
any time. The equalizer curves you can recall are as follows:
S.Bass, Powerful, Natural, Vocal, Flat, Custom1 and Custom2
p
The default setting is “Powerful”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 63
2 Touch [Graphic EQ].
3 Touch the equalizer curve name.
Customising the equaliser curves
p If the preset equalizer curve other than “Custom1” or
“Custom2” is modified, the equalizer curve settings in
“Custom1” will be overwritten.
p
If the equalizer curve stored in “Custom1” or “Custom2” is
modified, each stored curve will be overwritten.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 63
2 Touch [Graphic EQ].
3 Select a curve that you want to use as the basis
of customising.
4 Touch the frequency for which you want to
adjust the level.
p If you touch “Custom1” or “Custom2”, recall the equalizer
curve currently stored in “Custom1” or “Custom2”.
p
If you trail a finger across the bars of multiple equaliser
bands, the equaliser curve settings will be set to the value of
the touched point on each bar.
Setting the auto-adjusted equaliser
You can set the auto-adjusted equalizer to suit the vehicle’s
acoustics. To use this function, the Auto EQ measurement must
be done in advance.
Refer to Adjusting the equaliser curve automatically (Auto EQ)
on page 64
The default setting is “Off”.
1 Display the “Audio” setting screen.
Refer to Displaying the “Audio” setting screen on page 63
2 Touch [Auto EQ&TA] to switch “On” or “Off”.
Adjusting the equaliser curve
automatically (Auto EQ)
By measuring the vehicle’s acoustics, the equaliser curve can be
adjusted automatically to suit the vehicle interior.
WARNING
A loud tone (noise) may be emitted from the speakers when
measuring the vehicle’s acoustics. Never perform Auto EQ
measurement while driving.
CAUTION
Thoroughly check the conditions before performing Auto
EQ, as the speakers may be damaged if this is performed
under the following conditions:
—
When the speakers are incorrectly connected. (For exam-
ple, when a rear speaker is connected as a subwoofer
output.)
—
When a speaker is connected to a power amp delivering
output higher than the speaker’s maximum input power
capability.
If a microphone for acoustical measurement (sold
separately) is not placed in an appropriate location, the
measurement tone may become loud and measurement
may take a long time, resulting in battery drainage. Be sure
to place the microphone in the specified location.
Before operating the Auto EQ
function
Perform Auto EQ in as quiet a place as possible, with the
vehicle engine and air conditioning switched off. Also, cut
< CRB4818-B >
Audio adjustments
… 64 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

pioneer-avic-f80dab

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer AVIC-F80DAB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Pioneer AVIC-F80DAB

Pioneer AVIC-F80DAB Bedienungsanleitung - Deutsch - 95 seiten

Pioneer AVIC-F80DAB Installationsanweisung - Deutsch, Englisch, Holländisch - 204 seiten

Pioneer AVIC-F80DAB Bedienungsanleitung - Holländisch - 91 seiten

Pioneer AVIC-F80DAB Installationsanweisung - Französisch - 204 seiten

Pioneer AVIC-F80DAB Bedienungsanleitung - Französisch - 93 seiten

Pioneer AVIC-F80DAB Installationsanweisung - Italienisch, Spanisch - 204 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info