Bedienungsanleitung Pioneer AVIC-F840BT (Seite 78 von 220) (Englisch)

491795

Zoom out

Zoom in

Vorherige Seite

1/220

Nächste Seite

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programmes.

1 Touch

on the “FM” screen.

The “Function” menu appears.

2 Touch [Regional].

Each touch of [Regional] turns it on or off.

p Regional programming and regional net-

works are organised differently depending

on the country (i.e., they may change ac-

cording to the time, country or broadcast

area).

p The preset number may disappear on the

display if the tuner tunes in a regional sta-

tion that differs from the originally set sta-

tion.

p The regional function can be turned on or

off independently for each FM band.

Searching for an RDS station by

PTY information

You can search for general types of broadcast-

ing programmes.

= For details, refer to PTY list on page 81.

1 Touch

on the “FM” screen.

The “Function” menu appears.

2 Touch [PTY].

3 Touch [cPrev] or [Nextd] to select a

programme type.

There are four programme types:

NEWS&INF — Popular — Classics — Others

4 Touch [Start] to begin a search.

The tuner searches for a station broadcasting

that programme type.

# If you touch [Stop], the search is cancelled.

p The programmes of some stations may dif-

fer from that indicated by the transmitted

PTY.

p If no station is broadcasting the type of pro-

gramme you searched for, “Not Found” is

displayed for about two seconds and then

the tuner returns to the original station.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an-

other enhanced network’s TP station (a station

carrying information that cross-references TP

stations).

1 Tune in a TP station or another en-

hanced network’s TP station.

2 Touch [TA] on the “Function” menu to

turn traffic announcement standby on.

p To turn traffic announcements standby off,

touch [TA] again.

3 Use the VOL (+/–) button or Multi-con-

trol to adjust the TA volume when a traffic

announcement begins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Touch [Cancel] while a traffic announce-

ment is being received to cancel the an-

nouncement.

The tuner returns to the original source but re-

mains in standby mode until [TA] is touched

again.

You can also cancel the announcement by

changing the source or band.

p The system switches back to the original

source following traffic announcement re-

ception.

p Only TP stations and other enhanced net-

works’ TP stations are tuned in during seek

tuning or BSM when the TA function is on.

Engb

Chapter

Using the radio (FM)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-F840BT Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-F840BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info