Bedienungsanleitung Pioneer AVIC-HD1BT (Seite 36 von 192) (Englisch)

6663

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

Chapter 3How to Read Map Display NAVI

Display items

❒ Information with the mark (*) appears only

when the route is set.

❒ Depending on the conditions and settings,

some items may not be displayed.

Current location

The current location of your vehicle. The tip of the

triangular mark indicates your heading and the

display moves automatically as you drive.

❒ The head of the triangular mark is the current

vehicle position.

Destination*

The checker-flag indicates your destination.

Guidance point*

The next guidance point (next turning point, etc.)

is shown by a yellow flag.

The guidance points of up to three point ahead

including the waypoint are displayed.

waypoint

The checker-flag and number (1 to 5) indicates

your waypoint.

(1) Name of the street to be used (or next

guidance point)*

(2) Distance to the guidance point*

Touching allows you to hear the infor-

mation again.

(3) Distance to the destination (or distance to

waypoint)*

The distance on this button shows the distance to

the destination or to each waypoint. If waypoints

are set, the distance to the destination and the

next waypoint change with each touch.

❒ When the vehicle position is on the route, the

distance to the destination (or waypoint)

appears. When the vehicle position is not on

the route, the linear distance to the destina-

tion (or waypoint) appears.

(4) Name of the street your vehicle is travel-

ling along (or City Name, etc.)

(5) Compass

The red arrow indicates north. If the scale is less

than 50 km (25 mi), touching the map changes

the direction that it is displayed in (north up/

heading up). When the scale of the map is

greater than 50 km (25 mi), it is fixed to “north

up”.

Heading up:

The map display always shows the vehicle’s

direction as proceeding toward the top of the

screen.

North up:

The map display always has north at the top of

the screen.

(6) Zoom in/Zoom out

Touch to change the map’s scale.

➲ Changing the map’s scale ➞ Page 35

(7) Map scale

The scale of the map is indicated by distance.

(8) VOICE icon

Touch to change to the voice recognition mode.

❒ This is displayed only when the microphone

for voice recognition is connected.

➲ The voice operation of the navigation system

➞ Chapter 15

(9) RDS-TMC service provider

This appears when RDS-TMC signal is received.

The service provider name of RDS-TMC currently

received is shown.

❒ The station name or frequency will be shown

when the service provider name is not avail-

able.

(10) Current time

(11) Estimated time of arrival (or travel time

to your destination)*

The display alternates by pressing it.

❒ The estimated time of arrival is an ideal value

calculated based on the value set for

[Average Speed] and the actual driving

speed. The estimated time of arrival is only a

reference value, and does not guarantee

arrival at that time.

➲ How to set average speed ➞ Page 79

(12) Tracking dot

The tracking dot shows the route your vehicle has

travelled by white dots.

➲ Select the tracking setting ➞ Page 39

MAN-HD1BT-SOFTW-EN.book Page 34 Thursday, April 20, 2006 3:47 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-HD1BT Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-HD1BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info