Bedienungsanleitung Pioneer AVIC-HD3 II (Seite 37 von 193) (Englisch)

491808

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

2 Distance to the guidance point*

Touching

allows you to hear the infor-

mation again.

3 Distance to the destination (or distance to

waypoint)*

The distance on this button shows the dis-

tance to the destination or to each waypoint. If

waypoints are set, the distance to the destina-

tion and the next waypoint change with each

touch.

p When the vehicle position is on the

route, the distance to the destination (or

waypoint) appears. When the vehicle po-

sition is not on the route, the linear dis-

tance to the destination (or waypoint)

appears.

4 Street name (or city name) that your vehi-

cle is travelling along

5 Compass

The red arrow indicates north. If the scale is

less than 50 km (25 miles), touching the map

changes the direction that it is displayed in

(north up/heading up). When the scale of the

map is greater than 50 km (25 miles), it is

fixed to “North up”.

! Heading up:

The map display always shows the vehi-

cle’s direction as proceeding toward the

top of the screen.

! North up:

The map display always has north at the

top of the screen.

6 Zoom in/Zoom out

Touch to change the map’s scale.

= For details, refer to Changing the scale of

the map on page 39

7 Map scale

The scale of the map is indicated by distance.

8 VOICE icon

Touch to change to the voice recognition

mode.

p This is displayed only when the micro-

phone for voice recognition is con-

nected.

= For details, refer to Chapter 16

9 RDS-TMC service provider

This appears when the RDS-TMC signal is re-

ceived. The service provider name of the RDS-

TMC signal currently being received is shown.

p The station name or frequency will be

shown when the service provider name

is not available.

a Current time

b Estimated time of arrival (or travel time to

your destination)*

The display alternates by pressing it.

p The estimated time of arrival is an ideal

value calculated based on the value set

for [Average Speed] and the actual

driving speed. The estimated time of ar-

rival is only a reference value, and does

not guarantee arrival at that time.

= For details, refer to Changing the vir-

tual speed of the vehicle on page 79

c Tracking dot

The tracking dot shows the route your vehicle

has travelled by white dots.

= For more details about “Select the tracking

setting”, refer to Setting the Item on the Map

Screen on page 42

d Map of your surroundings (Side map)

Touching the screen changes the map to the

Scroll mode.

= For details, refer to Scroll the map to the lo-

cation you want to see on page 39

e Distance to a turning point*

Displayed on the enlarged intersection map.

The green bar gets shorter as your vehicle ap-

proaches a turning point.

f Next direction of travel*

When you approach an intersection, it ap-

pears green. The screen displays the distance

to the next guidance point.

g Direction line*

The direction towards your destination (or

scroll cursor) is indicated with a straight line.

h Lane information*

How to Read the Map Display

Engb

Chapter

How to Read the Map Display

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-HD3 II Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-HD3 II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info