Bedienungsanleitung Pioneer AVIC-HD3 II (Seite 129 von 193) (Englisch)

491808

129

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

1 Touch [FAD/BAL] in Audio Settings

menu.

The FAD/BAL screen appears. When Rear SP

(the subwoofer controller setting in

System Settings menu) is Sub.W, Balance

will be displayed instead of FAD/BAL.

= For details, refer to Setting the rear output

and subwoofer controller on page 136

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b moves the front/

rear speaker balance towards the front or the

rear.

Front: 15 to Rear: 15 is displayed as the front/

rear speaker balance moves from front to rear.

When the rear output setting is Rear SP

Sub.W, you cannot adjust front/rear speaker

balance.

= For details, refer to Setting the rear output

and subwoofer controller on page 136

3 Touch c or d to adjust left/right speak-

er balance.

Each time you touch c or d moves the left/

right speaker balance towards the left or the

right.

Left: 9 to Right: 9 is displayed as the left/right

speaker balance moves from left to right.

Using subwoofer output

This navigation system is equipped with a sub-

woofer output which can be turned on or off.

p When the subwoofer output is on, you can

adjust the cut-off frequency, the output

level, and the phase of the subwoofer.

1 Touch [Sub Woofer] in Audio Settings

menu.

When Preout (the subwoofer controller set-

ting in System Settings menu) is Full, you

cannot select [Sub Woofer].

= For details, refer to Setting the rear output

and subwoofer controller on page 136

2 Touch [On] to turn subwoofer output

on.

To turn subwoofer output off, touch [Off].

3 Touch [Reverse] or [Normal] to select

the phase of subwoofer output.

p If subwoofer output sound is not clear with

[Normal], change it to [Reverse].

4 Touch c or d to select cut-off fre-

quency.

Each time you touch c or d selects cut-off fre-

quencies in the following order:

50 — 80 — 125 (Hz)

Only frequencies lower than those in the se-

lected range are output from the subwoofer.

5 Touch [+] or [-] to adjust the output

level of the subwoofer.

+6 to -6 is displayed as the level is increased

or decreased.

Using non fading output

When the non fading output setting is on, the

audio signal does not pass through navigation

system’s low pass filter (for the subwoofer),

but is output through the RCA output.

1 Touch [Non Fading] in Audio Settings

menu.

Only when Preout (the subwoofer controller

setting in System Settings menu) is Full, you

can select [Non Fading].

= For details, refer to Setting the rear output

and subwoofer controller on page 136

2 Touch [On] to turn non fading output

on.

To turn non fading output off, touch [Off].

Customising the Audio Setting related with Audio Visual

Engb

129

Chapter

Customising the Audio Setting related with Audio Visual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-HD3 II Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-HD3 II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info