Bedienungsanleitung Pioneer avic-x1bt (Seite 16 von 26) (Englisch)

162189

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Chapter 1How to Use the Navigation System and Names of the Parts

❒ Do not insert anything other than a disc into

the disc loading slot.

➲ “Playable discs” ➞ Page 5

❒ If you cannot insert a disc completely or if the

disc is not recognised after you insert a disc,

check that the label side of the disc is up.

Press the EJECT button to eject the disc, and

check the disc for damage before inserting

the disc again.

❒ If the DVD drive does not operate properly, an

error message such as ERROR-11 may be dis-

played.

➲ Error messages ➞ Operation Manual

Adjusting the Volume

• Use the VOLUME/ATT button to adjust

the audio sound level.

Rotate the VOLUME/ATT button to increase

or decrease the volume.

❒ To adjust the navigation volume, go to the

navigation menu.

➲ Navigation volume adjustment ➞ Opera-

tion Manual

Turning the Source Off

• Press the SRC button and hold until the

source turns off.

❒ This product also can be switched off by

turning the ACC (ignition) OFF or detach-

ing the front panel.

Using the REAR/GUIDE Button

You can output the sound and video of the disc in

the built-in DVD drive to the rear display regard-

less of whether DVD drive is selected as the

source (REAR ON mode).

• When you have turned the REAR ON mode

on by pressing the REAR/GUIDE button,

you cannot turn it off even if you press the

SRC button and hold. In this case, press

the REAR/GUIDE button to turn the REAR

ON mode off.

• Press the REAR/GUIDE button to turn the

REAR ON mode on.

The sound and video are output to the rear

display and the illumination colour of the

REAR/GUIDE button changes to different

colour.

❒ To turn the REAR ON mode off, press the

REAR/GUIDE button again.

❒ When a CD or CD-ROM is inserted, sound

only is output to the rear display.

➲ Selecting the video of rear display ➞ Opera-

tion Manual

Opening and Closing the LCD

Panel

• Do not close the LCD panel with hands by

force. This may cause malfunction.

• Keep hands and fingers clear of the dis-

play unit when opening, closing, or adjust-

ing the LCD panel. Be especially cautious

of children’s hands and fingers.

The LCD panel will open or close automatically by

turning the ignition switch on or off. You can turn

off the automatic open/close function.

➲ Setting the automatic open/close function ➞

Operation Manual

• The automatic open/close function will operate

the display as follows:

— When the ignition switch is turned OFF

while the LCD panel is open, the LCD panel

will close after six seconds.

— When the ignition switch is turned ON

again (or turned to ACC), the LCD panel will

open automatically.

— Removing or attaching the front panel will

automatically close or open the LCD panel.

➲ Removing the front panel ➞ Page 15

• When the ignition switch is turned OFF after

the LCD panel has been closed, turning the

ignition switch ON again (or turning it to ACC)

will not open the LCD panel. In this case, press

the OPEN/CLOSE button to open the LCD

panel.

• When closing the LCD panel, check to make

sure that it has closed completely. If the LCD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer avic-x1bt Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer avic-x1bt

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info