Bedienungsanleitung Pioneer AVIC-X3 (Seite 20 von 182) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

62771

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

To guard against

electromagnetic interference

In order to prevent interference, set the follow-

ing items as far as possible from this naviga-

tion system, other cables or leads:

! TV aerial and aerial lead

! FM, MW/LW aerial and its lead

! GPS aerial and its lead

In addition you should lay or route each aerial

lead as far as possible from other aerial leads.

Do not bind them together, lay or route them

together, or cross them. Such electromagnetic

noise will increase the potential for errors in

the location display.

Before installing

! Consult with your nearest dealer if installa-

tion requires the drilling of holes or other

modifications of the vehicle.

! Before making a final installation of this

product, temporarily connect the wiring to

confirm that the connections are correct

and the system works properly.

Installing this navigation

system

Installation notes

! Do not install the display unit or the hide-

away unit in places where it may become

subject to high temperatures or humidity,

such as:

— Places close to a heater, vent or air con-

ditioner.

— Places exposed to direct sunlight, such

as on top of the dashboard or the rear

shelf.

— Places that may be splashed by rain, for

example close to the door.

! When installing the unit choose a position

that is strong enough to bear the weight of

the unit. Choose positions where the dis-

play unit or the hide-away unit can be firmly

installed, and install it securely. Unless the

display unit or the hide-away unit are se-

curely attached, the current location of the

vehicle cannot be displayed correctly.

! Do not install the hide-away unit on the

board covering the spare tyre or other

places which are subject to vibration.

! When the hide-away unit is installed under

a front seat, ensure that it does not ob-

struct the sliding action of the seat.

! When installing the hide-away unit, choose

a position that ensures there will be no con-

tact with luggage. The impact of a heavy

weight or sudden shock on the hide-away

unit will adversely affect the accurate dis-

play of the current location of the vehicle.

! Avoid installing the hide-away unit in

places where it will interfere with loading

and unloading of the spare tyre, jack, tools,

etc.

! Check that a disc can be ejected with the

display unit installed.

! Install the hide-away unit horizontally on a

surface within +30 degrees to –30 degrees

tolerance (within five degrees to the left or

right of your vehicle’s direction of travel).

Mis-installing the unit with the surface

tilted more than these tolerances would in-

crease the potential for errors in the loca-

tion display, and might otherwise cause

reduced display performance.

Installation

Engb

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-X3 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-X3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info