Bedienungsanleitung Pioneer AVIC-Z140BH (Seite 175 von 240) (Englisch)

492010

175

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Setting for rear view camera

The following two functions are available. The

rear view camera feature requires a separately

sold rear view camera (e.g. ND-BC5). (For de-

tails, consult your dealer.)

Rear view camera

The navigation system features a function that

automatically switches to the full-screen

image of the rear view camera installed on

your vehicle. When the shift lever is in the RE-

VERSE (R) position, the screen automatically

switches to full-screen rear view camera

image.

Camera for Rear view mode

Rear view can be displayed at all times (e.g.

when monitoring an attached trailer, etc.) as a

split screen where map information is partially

displayed. Please be aware that with this set-

ting, camera image is not resized to fit, and

that a portion of what is seen by the camera is

not viewable.

= For details, refer to Setting for rear view

camera on this page.

CAUTION

Pioneer recommends the use of a camera which

outputs mirror reversed images, otherwise the

screen image may appear reversed.

p Immediately verify whether the display

changes to a rear view camera image when

the shift lever is moved to REVERSE (R)

from another position.

p When the screen changes to full-screen

rear view camera image during normal

driving, switch to the opposite setting in

“Polarity”.

1 Display the “System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 171.

2 Touch [Back Camera].

The “Back Camera Settings” screen appears.

3 Touch [Camera].

This changes the setting to “On”.

p You can only switch to “Rear View” if this

setting is “On”.

4 Touch [Polarity] to select an appropriate

setting for polarity.

Each time you touch [Polarity] switches be-

tween the following polarity:

! Battery: When the polarity of the con-

nected lead is positive while the shift lever

is in the REVERSE (R) position

! GND: When the polarity of the connected

lead is negative while the shift lever is in

the REVERSE (R) position

Adjusting the response

positions of the touch panel

(touch panel calibration)

If you feel that the touch panel keys on the

screen deviate from the actual positions that

respond to your touch, adjust the response po-

sitions of the touch panel screen.

p Do not use a sharp pointed tool such as a

ballpoint pen or a mechanical pen, which

could damage the screen.

1 Display the “System Settings” screen.

= For details, refer to Displaying the screen for

system settings on page 171.

2 Touch [Screen Calibration].

A message confirming whether to start the ca-

libration appears.

3 Gently touch the center of + mark dis-

played on the screen.

The target indicates the order.

After you touch all marks, the adjusted posi-

tion data is saved.

p Do not turn off the engine while saving the

adjusted position data.

# If you press the MODE button, the previous

adjustment position returns.

# If you press and hold the MODE button, the

adjustment is canceled.

175

Chapter

Customizing preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-Z140BH Seite 175

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info