Bedienungsanleitung Pioneer AVIC-Z140BH (Seite 180 von 240) (Englisch)

492010

180

Zoom out

Zoom in

Vorherige Seite

1/240

Nächste Seite

Setting the rear output

The navigation system’s rear output can be

used for a full-range speaker or subwoofer

connection. If you switch “Rear SP” to

“Sub. W”, you can connect a rear speaker lead

directly to a subwoofer without using an auxili-

ary amp.

Initially, the navigation system is set for a rear

full-range speaker connection (“Full”).

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting. (When you use the product

without RCA rear output, this setting only

applies to the rear speaker leads.)

p “Rear SP” can be set only when the source

is selected to “Off”.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the screen for

AV system settings on page 178.

2 Touch [Rear SP].

Each touch of [Rear SP] changes the settings

as follows:

! Full

When no subwoofer is connected to the

rear output, select “Full”.

! Sub. W

When a subwoofer is connected to the rear

output, select “Sub. W”.

Switching the muting/

attenuation timing

You can mute the AV source volume or attenu-

ate the output signal.

p Even if this setting is “Off”, the navigation

system will mute or attenuate the AV

source volume when the mute signal is out-

put via MUTE lead.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the screen for

AV system settings on page 178.

2 Touch [Mute].

Each touch of [Mute] changes the settings as

follows:

AVIC-Z140BH

! Guide/Tel/VR: The volume is muted or atte-

nuated according to the following condi-

tions.

— When the navigation outputs the gui-

dance voice.

— When you use a cellular phone via

Bluetooth technology (dialing, talking,

incoming call).

— When the voice recognition mode is ac-

tivated.

! Tel/VR: The volume is muted or attenuated

according to the following conditions.

— When you use a cellular phone via

Bluetooth technology (dialing, talking,

incoming call).

— When the voice recognition mode is ac-

tivated.

! Off: The volume does not change.

AVIC-X940BT

! Guide/Tel: The volume is muted or attenu-

ated according to the following conditions.

— When the navigation outputs the gui-

dance voice.

— When you use a cellular phone via

Bluetooth technology (dialing, talking,

incoming call).

! Tel: The volume is muted or attenuated

when you use a cellular phone via

Bluetooth technology (dialing, talking, in-

coming call).

! Off: The volume does not change.

p AV source volume returns to normal when

the corresponding action ends.

Switching the muting/

attenuation level

You can select the muting/attenuation level of

“Mute”. This setting is also effective for a

mute signal that has been received from the

MUTE lead connected to the navigation unit.

p This menu is not available when AV source

is “Off”.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the screen for

AV system settings on page 178.

180

Chapter

Customizing preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-Z140BH Seite 180

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info