Bedienungsanleitung Pioneer AVIC_X1R (Seite 13 von 27) (Englisch)

25912

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Chapter 1 How to Use Navigation Unit and Names of the Parts

Turning the unit on and select-

ing a source

• If the program is not installed, see “Opera-

tion Manual” and install the program.

1 Turn the ignition switch (ACC) ON.

The product’s power supply comes on.

2 Press SRC button to select a source.

Press SRC button repeatedly to switch

between the following sources:

DAB (digital audio broadcasting) — RADIO

(tuner) — TV (television) — AV (video input)

— DISC [CD, MP3, CD/MP3](built-in DVD

drive) — S-DVD (DVD player/multi-DVD

player) — M-CD (multi-CD player) — EXT-1

(external unit 1) — EXT-2 (external unit 2) —

AUX (Auxiliary equipment)

❒ Press and hold to turn the source off.

❒ In the following cases, the sound source will

not change to them:

— When a unit corresponding to each source

is not connected to this unit.

— When no disc (DVD-Video, CD) is set in this

unit.

— When no disc is set in the DVD-player (S-

DVD).

— When no magazine is set in the multi-CD

player.

— When no magazine is set in the multi-DVD

player.

— When the AUX (auxiliary input) is set to off

(refer to Operation Manual).

— When the AV (video input) is not set to

VIDEO (refer to Operation Manual).

❒ External unit refers to a Pioneer product (such

as one available in the future) that, although

incompatible as a source, enables control of

basic functions by this unit. Two external units

can be controlled by this unit. When two exter-

nal units are connected, the allocation of

them to external unit 1 or external unit 2 is

automatically set by this unit.

❒ When this unit’s blue lead is connected to the

vehicle’s auto-aerial relay control terminal, the

vehicle’s aerial extends when ACC (ignition) is

turned on and attach the front panel. To

retract the antenna, detach the front panel.

The vehicle’s aerial extends regardless of turn-

ing this unit’s source on or off.

Loading a disc

• Insert a disc into the disc loading slot.

Format reading will start.

For DVD-Video, CD

❒ DISC AUTO is off in the default setting.

➲ DISC AUTO ➞ Operation Manual

❒ When a disc is already loaded in this unit,

select the source by pressing SRC button.

❒ To eject a disc, press EJECT button.

For the map disc

❒ Inserting the disc starts DVD navigation

mode.

❒ Removing the disc sets Memory navi

mode.

❒ You can use NAVI/AV button to switch

between navigation map displays and audio

operation displays.

❒ The DVD drive plays one, standard, 12-cm or

8-cm (single) disc at a time. Do not use an

adapter when playing 8-cm discs.

❒ Do not insert anything other than a disc into

the disc loading slot.

➲ Playable discs ➞ Page 6

❒ If you cannot insert a disc completely or if

after you insert a disc the disc is not recog-

nised, check that the label side of the disc is

up. Press EJECT button to eject the disc, and

check the disc for damage before inserting

the disc again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC_X1R Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC_X1R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info