Bedienungsanleitung Pioneer BDP-150-S (Seite 55 von 60) (Englisch)

491872

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Control function

Network

Problem Check Remedy

Control function does not

work.

Is the HDMI cable properly

connected?

To use the Control function, connect the Flat Screen TV and AV system

(AV receiver or amplifier, etc.) to the HDMI OUT terminal (page 17).

Is the HDMI cable you are

using a High Speed HDMI

Cable?

Use a High Speed HDMI

Cable. The Control function may not work

properly if an HDMI cable other than a High Speed HDMI

Cable is

used.

Is this player connected to

the TV using an HDMI cable

to watch the picture?

If video signals are being output from a terminal other than the HDMI

OUT terminal, the Control function does not work. Connect to the TV

using an HDMI cable (page 17).

For the BDP-450:

Is the HDMI Mode set

appropriately?

• When connecting a device supporting the control function to the

HDMI OUT (MAIN) terminal, set the HDMI Mode to Dual.

• When connecting a device supporting the control function to the

HDMI OUT (SUB) terminal, set the HDMI Mode to Separate or Pure

Audio (page 41).

Is Control set to On on the

player?

Set Control to On on the player (page 42).

Does the connected device

support the Control function?

• The Control function will not work with devices of other brands that

do not support the Control function, even when connected using an

HDMI cable.

• The Control function will not work if devices that do not support the

Control function are connected between the Control-compatible device

and the player.

• See page 18.

• Even when connected to a Pioneer product compatible with the

Control function, some of the functions may not work.

Also refer to the operating instructions for the connected device.

Is Control set to On on the

connected device?

Set

Contro

l to On on the connected device. The Control function

operates when Control is set to On for all devices connected to the

HDMI OUT terminal.

Once connections and settings of all the devices are finished, be sure

to check that the player’s picture is output to the Flat Screen TV. (Also,

check after changing the connected devices and connecting and/or

disconnecting HDMI cables.) If the player’s picture is not being output

to the Flat Screen TV, the Control function may not work properly.

For details, refer to the operating instructions of the connected device.

Are multiple players

connected?

The Control function may not work if three or more players, including

this player, are connected by an HDMI cable.

Problem Check Remedy

• BD-LIVE function

(connection to the Internet)

cannot be used.

• “No valid id file found!” is

displayed when I try to update

the software.

Perform Connection Test (page 45). If “Networks is OK.” is displayed,

check the proxy server settings (page 45). Also, there may be a problem

with the Internet connection. Contact your Internet service provider.

Software updating is slow. Depending on the Internet connection and other conditions, some time

may be required to update the software.

BDP-450_VXE8_IBD_EN.book 55 ページ２０１２年６月２２日　金曜日　午後２時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-150-S Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-150-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info