Bedienungsanleitung Pioneer BDP-160-K (Seite 35 von 60) (Englisch)

528314

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Audio Output

Digital Output Bitstream Select this to output digital audio signals directly.

PCM Select this to output digital audio signals converted to 2-channel audio

signals.

Reencode When a BD containing secondary audio and interactive audio is played, the

two audio signals are mixed and converted to Dolby Digital audio or DTS

audio for output.

Off Select this to output audio signals other than digital audio signals.

Downmix Stereo Surround audio signals converted to linear PCM audio signals are converted

into 2-channel (stereo) signals for output.

Lt/Rt Surround for output (when the connected AV receiver or amplifier, etc., is

compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the

linear PCM audio signals as surround audio signals).

Downsampling 48k Outputs audio signals that are limited to a sampling frequency below the set

sampling frequency from the DIGITAL OUT terminal. Select according to the

performance of the connected device.

96k

192k

• Sources with sampling frequencies of over 192 kHz cannot be played.

• When playing copyright-protected discs or files, the signals are output with the sampling frequency limited to 48 kHz or below,

regardless of this setting.

DRC (Dynamic Range

Control)

Off Select this to output audio signals without using the DRC function.

On Select this to adjust the range between the loudest and softest sounds

(dynamic range) for playback at average volume. Use this when it is hard to

hear dialog or when watching movies at midnight.

Auto Select to switch the DRC setting On/Off automatically according to the input

audio signal from the disc. This only affects Dolby TrueHD signals.

• This affects such audio signals as Dolby Digital, Dolby TrueHD, and Dolby Digital Plus.

• DRC affects audio signals output from the following audio output terminals:

– Analog audio signals output from the AUDIO OUT terminals

– Linear PCM audio signals output from the DIGITAL OUT or HDMI OUT terminals

• Depending on the disc, the effect may be weak.

• The effect may differ depending on the speakers, the AV amplifier settings, etc.

HDMI

Color Space RGB Select this to output the video signals as RGB signals. Choose this if the

colors seem too faint and the black seems too bright.

YCbCr Select this to output the video signals as YCbCr 4:4:4 signals.

YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.

Full RGB Select this to output the video signals as RGB signals. Choose this if the colors

seem too dense and all the dark colors are displayed in a uniform black.

Resolution Auto Select this to choose the resolution of the video signals output from the

HDMI OUT terminal automatically.

480I/576I Output the video signals from the HDMI OUT terminal with the selected

resolution.

The resolution can be changed by pressing HDMI, but Auto cannot be

selected.

The resolution switches each time HDMI is pressed.

480P/576P

720P

1080I

1080P

Setting Options Explanation

BDP-160_EN_ASEAN.book 35 ページ２０１３年７月１７日　水曜日　午後４時１２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-160-K Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-160-K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info