Bedienungsanleitung Pioneer BDP-LX58 (Seite 56 von 64) (Englisch)

611803

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

• No sound is output.

• Sound is not output

properly.

Is the volume set to the

minimum?

If the volume of the TV or AV amplifier is set to the minimum, raise it.

Is the disc played back in

slow motion?

Is the disc played back in fast

forward or fast reverse?

No sound is output during slow motion play and forward and reverse

scanning.

Are the audio cables properly

connected?

• Connect the cable properly according to the connected devices

(page 16).

• Insert the cable firmly and all the way in.

• If the connection plug or terminal is dirty, wipe it clean.

Is the audio cable damaged? If the cable is damaged, replace it with a new one.

Is Audio Output properly

set?

Set Audio Output properly, according to the connected device

(page 42).

Are the connected

components (AV receiver or

amplifier, etc.) properly set?

Read the operating instructions for the connected components and

check the volume, input, speaker settings, etc.

Is HDMI Audio Out properly

set?

Set HDMI Audio Out to Re-encode or PCM. (page 43).

Is the output video resolution

properly set?

Switch the resolution at which the video and audio are output by

pressing RESOLUTION /.

Is a DVI device connected? The sound will not be output from the HDMI OUT terminal if a DVI

device is connected. Connect the device to a DIGITAL OUT terminal or

the AUDIO OUT terminals (page 20).

• For some BDs, audio signals are only output from DIGITAL OUT

terminal or the HDMI OUT terminal.

• The sound may not be output for discs containing sound other than

audio signals or non-standard sound.

• When copy-protected discs are played, the picture or sound may not

be properly output. This is not a malfunction.

Is the HDMI Mode set

appropriately?

Set the HDMI Mode properly, according to the connected device

(page 43).

Is the DIRECT function set to

ON?

Audio output does not occur from the HDMI or DIGITAL AUDIO OUT

terminals if the DIRECT function is set to On. Turn the DIRECT function

off to output audio from the HDMI

or DIGITAL AUDIO OUT terminals

(page 29).

Left/right audio channels are

inverted or only one side is

produced.

Are the audio cables properly

connected?

Check whether the audio cables for the left and right channels are

inverted or whether the cable for one side is disconnected (page 20).

Multi-channel sound is not

output.

Is the audio output of the

connected AV receiver or

amplifier, etc., properly set?

Read the operating instructions for the connected AV receiver or

amplifier and check the audio output settings of the AV receiver or

amplifier.

Is multi-channel sound

selected?

Use the menu screen or AUDIO to switch the disc’s sound to multi-

channel.

Noise can be heard when

outputting DTS Digital Audio

signals from the DIGITAL

OUT terminal.

Is the connected AV receiver

or amplifier compatible with

DTS Digital Surround?

If an AV receiver or amplifier that is not compatible with DTS Digital

Surround is connected to the DIGITAL OUT terminal, set Digital

Output to PCM (page 42).

192 kHz or 96 kHz digital

audio signals cannot be

output from the DIGITAL

OUT terminal.

• Copyright-protected audio is converted to 48 kHz or less before

output.

• Set Max Sampling Frequency to 96KHz or 192KHz (page 42).

Secondary audio or

interactive audio is not

output.

Is HDMI Audio Out properly

set?

When listening to the sound from an HDMI OUT terminal, set HDMI

Audio Out to PCM (page 43).

Are Digital Output properly

set?

When listening to the sound from an DIGITAL OUT terminal, set

Digital Output to Re-encode or PCM (page 42).

Problem Check Remedy

BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 56 ページ２０１４年９月９日　火曜日　午前１０時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-LX58 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-LX58

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info