Bedienungsanleitung Pioneer BDP-LX88 (Seite 25 von 64) (Englisch)

574229

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Switching the output

video resolution

Use the procedure below to switch the output video

resolution from the various video output terminals.

 Press RESOLUTION /.

• The current output video resolution setting is

displayed on the player’s front panel display.

To switch the output video resolution, press

RESOLUTION / again.

• The output video resolution setting can also be

switched by selecting Resolution from the Initial

Setup menu (page 41).

 If high definition videos of 4K etc.

are not visible

Change the settings by the following procedure.

1 Press the HDMI button on the remote control for

5 seconds or more.

2 If “4K 4:4:4” is displayed on the product screen,

use / button to change it to “4K 4:2:0”.

If the video improves after changing the setting, continue

using this setting.

To revert the setting to the original value, do the operation

described above again and change the setting to “4K

4:4:4”.

Caution

• On some devices (TV, AV receiver or amplifier, etc.),

the video or audio may not be output properly when

the resolution is switched. If this happens, use

RESOLUTION to set a resolution at which the video

and audio are properly output.

• When video signals are being output with a resolution

of 4K/24p, 4K, 1080/50i, 1080/50p, 720/50p, 1080/24p,

1080/60i, 1080/60p or 720/60p from the HDMI OUT

terminals, the picture may be output with an aspect

ratio of 16:9, even if the TV Aspect Ratio is set to 4:3

(Standard).

• The picture may not be displayed for a while when the

resolution is switched.

• When the connected device supports 3D and if a 3D

Disc is played back, the 3D output is prioritized for

output, regardless of the resolution settings. Also,

switching of resolution may not be possible while the

3D contents are playing.

•When Auto is selected, the picture is output at 60

frames/second if your TV is not compatible with 1080/

24p signals.

•When 4K, 4K/24p, 1080/24p or Source Direct is

selected, the signals are output as such, even if your

TV is not compatible with 4K, 4K/24p or 1080/24p

signals. If the picture is not displayed properly, use

RESOLUTION / to set an output video resolution

at which the video and audio signals are properly

output.

•When the Resolution is set to Auto and if the

television set in use supports 4K or 4K/24p output,

then the output is made in 4K or 4K/24p. If the

connected television set does not support 4K or 4K/

24p, then the output is made with a recommended

resolution other than 4K.

• The pictures are output with the preferred output

resolution of the device (TV, AV receiver or amplifier,

etc.) connected to the selected video output terminal.

However, if devices are connected to both HDMI

MAIN and HDMI SUB, the pictures are output with a

resolution which both devices support. If the

resolution supported by the devices connected to the

HDMI MAIN and HDMI SUB terminals vary, then

either turn off the power of the device that is not in

use, or connect the device that will be used to the

HDMI MAIN terminal and set the HDMI Mode

setting to Single in ord

er to deliver output on the

device used for viewing video with optimum

resolution.

•When the HDMI Mode is set to Dual and if only one

of the devices that is connected to the HDMI MAIN

and the HDMI SUB supports 3D, then a 3D disc may

not be played back. In such cases, either only connect

the device that supports 3D or connect the device that

supports 3D to the HDMI MAIN terminal and set the

HDMI Mode to Single to play back the disc.

•When the Resolution is set to Auto, 1080p, 4K or 4K/

24p and if the resolution of output from the HDMI is

1080p, 4K or 4K/24p, then output may not occur

depending on the HDMI cable in use.

• There are resolutions that cannot be output

depending on the television set in use.

•When the HDMI Mode is set to Pure Audio, the

1080p60, 4K/60p or 4K/24p, output will not occur even

if the resolution is set to Auto or 1080p, 4K or 4K/

24p. The output will be delivered with a resolution of

1080/60i, 1080/24p or the like, depending on the

resolution of the source and the connected television

set.

DIRECT

PROGRAM

RGYB

BOOKMARK

ZOOM INDEX

TV CONTROL VOL

LIGHT

HDMI

CD/SACD

DIMMER

RESOLUTION

INPUT

BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 25 ページ２０１４年９月９日　火曜日　午前１０時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-LX88 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-LX88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info