Bedienungsanleitung Pioneer BDP-LX88 (Seite 59 von 64) (Englisch)

574229

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

The audio files stored on

components on the network,

such as a computer, cannot

be played back.

There are cases where a component with Internet security software

installed cannot be accessed.

The audio component on the

network which has been

switched off is switched on.

Switch on the audio component on the network before switching on

this unit.

If the client is automatically authorized, you need to enter the

corresponding information again. Check whether the connection

status is set to “Do not authorize”.

Check the audio files stored on the component connected to the

network.

Install Windows Media Player 11 or Windows Media Player 12 on your

computer.

Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4 AAC,

or WMA. Note that some audio files recorded in these formats may not

be played back on this unit.

Audio files recorded in

MPEG-4 or AAC are being

played back on Windows

Media Player 11 or Windows

Media Player 12.

Audio files recorded in MPEG-4 AAC cannot be played back on

Windows Media Player 11 or Windows Media Player 12. Try using

another server. Refer to the operation manual supplied with your

server.

Check whether the component is affected by special circumstances or

is in the sleep mode. Try rebooting the component if necessary.

Try changing the settings for the component connected to the network.

The folder stored on the

omponent connected to the

network has been deleted or

damaged.

Check the folder stored on the component connected to the network.

The audio files stored on

components on the network,

such as a computer, cannot

be played back.

Check the computer’s network settings, security settings, etc.

Playback does not start. The component is currently

disconnected from this unit

or the power supply.

Check whether the component is properly connected to this unit or the

power supply.

The computer is not properly

operated.

The corresponding IP

address is not properly set.

Switch on the built-in DHCP server function of your router, or set up the

network manually according to your network environment.

The automatic configuration process takes time. Please wait.

Cannot access Windows

Media Player 11 or Windows

Media Player 12.

You are currently logged onto

the domain through your

computer with Windows 7

installed.

Instead of logging onto the domain, log onto the local machine.

Video and audio playback are

undesirably stopped or

disturbed.

Check whether the audio file was recorded in a format supported by

this unit.

Even audio files listed as playable on this unit may sometimes not be

played back or displayed.

Check whether the folder has been damaged or corrupted.

The LAN cable is currently

disconnected.

Connect the LAN cable properly.

There is heavy traffic on the

network with the Internet

being accessed on the same

network.

Use 100BASE-TX to access the components on the network.

Problem Check Remedy

BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 59 ページ２０１４年９月９日　火曜日　午前１０時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-LX88 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-LX88

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info