Bedienungsanleitung Pioneer BDP-X300 (Seite 44 von 64) (Englisch)

699670

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

PIN Input

Connection settings are made by inputting the 8-digit

PIN code shown on the main display to the access point

to which you selected. Follow the instructions shown in

Connecting using PIN code configuration on the right.

When performing wireless settings set Initial Setup

Network Interface to Wireless.

1 Press HOME MENU.

The HOME MENU screen is displayed.

2Use 3/4/2/1 to select Initial Setup and press

ENTER.

The Initial Setup screen is displayed.

3 Select Initial Setup Network Wireless

Setting Next Screen and press ENTER.

A confirmation screen is displayed.

4Use 2/1 to select Yes, then press ENTER.

The Wireless Setting screen is displayed.

5Use 3/4 to select Auto, then press ENTER.

The WPS (Wi-Fi Protected Setup) screen is displayed.

6Use 3/4 to switch between [ PBC] or [ PIN]

screens.

If WPS button is at the access point, it is recommended

you select [ PBC].

When connecting using PBC go to step 7.

When connecting using PIN go to step 8.

7 When connecting using PBC (Push Button), on

the [ PBC] screen use 2/1 to select Next, then

press ENTER.

Then press the WPS button on the access point within

120 seconds.

8 When connecting using PIN confirm the PIN

Code on the [ PIN] screen. Use cursor 2/1 to

select Next, then press ENTER.

9 Enter into the access point the PIN Code that you

confirmed in step 8 above.

The PIN Code input method differs depending on the

LAN device used. For details, consult the operating

instructions accompanying your LAN device.

Wireless network

connection

Wireless network setup

For the wireless network connection, the player needs to

be set up for network communication. This adjustment

can be done from the Setup menu. Adjust the

NETWORK setting as follow. Setting up the access point

or the wireless router is required before connecting the

player to the network.

∫ Preparation

Before setting the wireless network, you need to:

– set the access point or wireless router.

– note the SSID and security code of the network.

Note

• This unit conforms to the IEEE802.11b/g/n Wi-Fi

standards.

• Only 2.4 GHz is supported for the IEEE802.11n

standards.

1 Select Initial Setup Network Interface

Wireless and press ENTER.

• When making the wireless setting for the first time,

Wireless Setting is displayed. Proceed to step 4.

• When already set to Wireless, proceed to step 2.

2 Select Initial Setup Network Wireless

Setting Next Screen and press ENTER.

3 Select Yes and press ENTER to continue.

The new connection settings reset the current network

settings.

4 Wireless Setting menu is displayed.

Use 3/4 to select Scan. Then select Next using the 2/

1 and press ENTER.

5 The player scans the all available access points

or wireless routers within range and display them as

a list. Use 3/4 to select an access point or wireless

router on the list, and then press ENTER.

• If you have security on your access point or wireless

router, verify that the WEP or WPA key that was

entered into the player matches the routerís

information exactly. You need to input the security

code as necessary.

BDP-X300_72-BDPX300-GBRB1_En.book 44 ページ２０１６年５月２４日　火曜日　午後１時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-X300 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-X300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info