Bedienungsanleitung Pioneer BDP-X300 (Seite 50 von 64) (Englisch)

699670

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this

component, check the points below. Sometimes the trouble may lie in another component. Inspect the other

components and electrical appliances being used. If the trouble cannot be rectified even after checking the points

below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

Playback

Problem Check Remedy

• Disc does not play.

• Disc tray opens

automatically.

Is the disc one that is

playable on this player?

• Check whether the disc is one that can be played on this player

(page 7).

• Discs that have not been finalized cannot be played.

Is the file one that is playable

on this player?

• Check whether the file is one that can be played on this player

(page 10).

• Check whether or not the file is damaged.

Is the disc scratched? It may not be possible to play scratched discs.

Is the disc dirty? Clean the disc (page 49).

Is there a piece of paper or

sticker attached to the disc?

The disc may be warped and unplayable.

Is the disc properly set in the

disc tray?

• Set the disc with the printed side facing up.

• Set the disc properly in the depression in the disc tray.

Is the region number

correct?

See page 9 for the region numbers of discs that can be played on this

player.

• Eliminate any condensation inside the unit (page 48).

• Depending on how the disc was recorded, the status of the pickup

and compatibility between the disc being used and this unit, it may not

be possible to play the disc properly.

• If the recorded time is short, it may not be possible to play the disc

properly.

• BD-RE/-R discs recorded in formats other than BDMV or BDAV

cannot be played.

No picture is displayed or the

picture is not displayed

properly.

Is the HDMI cable properly

connected?

• Connect the cable properly according to the connected devices

(page 15).

• Disconnect the cable, then reinsert it firmly and all the way in.

Is the HDMI cable damaged? If the cable is damaged, replace it with a new one.

Is the input setting on the

connected TV or AV receiver

or amplifier right?

Read the operating instructions for the connected components and

switch to the proper input.

Is the output video resolution

properly set?

Switch the resolution at which the video and audio are output by

pressing HDMI.

Is the player connected with

an HDMI cable other than a

High Speed HDMI

cable

(with a Standard HDMI

cable)?

Connect the player to the TV using a High Speed HDMI

cable.

Is the HQ Sound function

on?

Video is not output when the HQ Sound function is on (page 30).

Is a DVI device connected? The picture may not be displayed properly if a DVI device is

connected.

Is Color Space properly set? Change the Color Space setting (page 39).

Playback stops. • Playback may stop if the unit is subject to shocks or set in an

unstable place.

• Playback may stop when a USB device is connected or disconnected

during playback. Do not connect or disconnect USB devices during

playback.

BDP-X300_72-BDPX300-GBRB1_En.book 50 ページ２０１６年５月２４日　火曜日　午後１時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-X300 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-X300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info