Bedienungsanleitung Pioneer CDJ-900NXS (Seite 10 von 40) (Englisch)

574225

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Connections

! Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

! Refer to the operating instructions for the component to be connected.

! Connect the power cord after all the connections between devices have been completed.

! When using a LAN cable for connection, be sure to use either the LAN cable included with this product or an STP (shielded twisted pair) cable.

! Do not disconnect the LAN cable when music files and/or information are being shared using PRO DJ LINK.

Descriptions of terminals

AC IN

CONTROL

LINK

AUDIO OUT

NTROL

DIGITAL OUT

145623

1 AUDIO OUT L/R terminals

Connect the audio cables (included) here.

2 AC IN

Connect this to a power outlet.

Connect the power cord after all the connections between devices

have been completed.

Be sure to use the included power cord.

3 CONTROL terminal

This is used to interconnect DJ players with a monaural mini phone

plug (Ø 3.5 mm) cable (commercially available) to send control

signals for relay playback.

= Connections for relay play (p.13)

4 DIGITAL OUT terminal

Connect a digital coaxial cable here.

5 LINK terminal

Connect the LAN cable (included) here.

6 USB port

Connect to a computer.

Basic style

Playback on this unit is performed mainly using tracks prepared with rekordbox installed on a computer.

! For instructions on operating rekordbox, see rekordbox (Mac/Windows)’s operating instructions. The rekordbox (Mac/Windows) operating instruc-

tions can be viewed from the rekordbox (Mac/Windows) [Help] menu.

Also, for DJ players and DJ mixers, up to four PRO DJ LINK-compatible players can be connected with LAN cables (CAT5e) using PRO DJ LINK

connections.

! A switching hub (commercially available) may be necessary, depending on the combination of models used. Use a switching hub of 100 Mbps or

greater. Some switching hubs may not operate properly.

! A switching hub (commercially available) is necessary to connect to a mixer equipped with only one LAN port. For mixers with enough LAN ports for

all the DJ players and computers in the system, connect directly to the LAN ports on the mixer’s rear panel, without using a hub.

! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g stan-

dards. Depending on the signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not

operate properly.

Connecting to a mixer with only one LAN port

When connecting to a mixer with only one LAN port using a switching hub, in order to use rekordbox’s music file management functions to their maxi-

mum, set the channel number of the mixer to which the audio or coaxial digital cable is connected and the player number displayed at the bottom left

of the main unit display to the same number.

(Ex.: When the audio cable is connected to channel 1)

Audio cable

PHONO

CH 1

CD/ LINE

AL GND

PLAYER 1

CH 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer CDJ-900NXS Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer CDJ-900NXS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info