Bedienungsanleitung Pioneer CX303 (Seite 53 von 60) (Englisch)

573839

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Additional information 13

DVD/CD/Video CD player

SND. DEMO shows in the

display and the unit can’t be

controlled.

• Press and hold  (stop) on the front panel for about five seconds. The

disc tray ejects automatically to indicate the Sound Demo mode is

disabled.

TRAYLOCK shows in the display

and the tray can’t be ejected.

• Press and hold  OPEN/CLOSE on the front panel for about eight

seconds. Then the tray can be opened/closed using  OPEN/CLOSE.

Problem Remedy

The disc is ejected

automatically after loading.

• Clean the disc and align the disc properly in the disc guide.

• If the region number on a DVD-video disc does not match the number on

the player, the disc cannot be used (see DVD Video regions on page 49). In

this case, the message “Incompatible disc region number/Can’t play disc.”

appears on-screen.

• Allow time for any condensation inside the player to evaporate. Avoid

using the player near an air-conditioning unit.

Playback is not possible. • Disc may be loaded upside down. Reload the disc with the label side face

up.

Picture playback stops and the

operation buttons cannot be

used.

• Press , then start playback again ().

• Switch the power off once, then on again using the front panel

 STANDBY/ON button.

Settings are canceled. • If the power is cut during operation, settings may be canceled.

No picture/No color. • Check that connections are correct and that plugs are inserted fully.

• Check the instruction manual of the TV/monitor to make sure the TV/

monitor settings are incorrect.

• If the Progressive setting is selected and you have used component

video cables to connect a TV that is not compatible with a progressive scan

signal, you will not be able to see any picture at all. With your TV connected

using either the composite or S-video terminals, change the Component

Out setting to Interlace (see Video Output settings on page 42).

Screen is stretched or aspect

does not change.

• The TV Screen setting is incorrect. Set the TV Screen option to match the

TV/monitor you’re using (see Video Output settings on page 42).

When recorded on a VCR or

passed through an AV selector,

there is disturbance in the

playback picture.

• This system uses copy-protection technology which may prevent

recording or cause picture problems when connected through a VCR or AV

selector. This is not a malfunction.

Picture disturbance during

playback or dark.

• This player is compatible with Macro-Vision System copy guard. Some

discs include a copy prevention signal, and when this type of disc is played

back, stripes etc., may appear on some sections of the picture depending

on the TV. This is not a malfunction.

• Discs respond differently to particular player functions. This may result in

the screen becoming black for a brief instant or shaking slightly when the

function is executed. These problems are largely due to differences

between discs and disc content and are not malfunctions of this player.

CX303_505_500.book Page 53 Wednesday, June 27, 2007 2:39 PM

Downloaded from www.Manualslib.com manuals search engine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer CX303 Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info