455302
29
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
Other options
08
29
Press MENU or EXIT to complete the
setting and exit the menu.
Press RETURN to complete the setting
and return to the previous menu.
Picture Format
Press 2/3 to select 16:9, 4:3 Letterbox or
4:3 Centre Cut.
If your DTR is connected to a 16:9 TV, select
16:9. If your DTR is connected to a 4:3 TV
and you wish to view a 16:9 programme, you
must select how that 16:9 programme is
displayed on your TV. If you select 4:3
Letterbox, the full width of the image is
displayed but areas above and below the
image are blank. If you select 4:3 Centre
Cut, the image fills the screen vertically but
the right and left ends of the image are not
displayed.
Pressing WIDE on the remote will
override the setting here.
TV Video Output
This sets the video signal format for the TV
SCART only. Press 2/3 to select RGB,
Composite or S-Video.
Check your TV manual to see if it is
compatible with RGB or S-Video.
VCR Video Output
This sets the video signal format for the VCR
SCART only. Press 2/3 to select Compos-
ite or S-Video.
Check your VCR manual to see if it is
compatible with S-Video.
In order to use S-Video with your VCR
you may need to change settings on
your VCR. See the users manual for
your VCR for information.
RF Output Channel
This selects an output channel for the RF
modulator. Press 2/3 to choose any
channel from 21 to 68 or Off.
Sound
This sets the audio output from the TV and
VCR SCART only. Press 2/3 to select
Mono or Stereo.
Volume
This adjusts the volume of the audio output
from the TV SCART from 1 (minimum) to 10
(maximum). Press 2/3 to choose a setting
from 1 to 10.
Installation
In the Installation menu you can scan for
new channels, delete channels no longer
available and check the signal strength of
each channel. To access these go to the
Installation menu as follows:
1 While viewing a programme, press
MENU. The HOME MENU is displayed.
DBR-TF100GB_27_32.p65 7/22/03, 12:15 PM29
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer DBR-TF100GB wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info