Bedienungsanleitung Pioneer dcs fs 30 (Seite 21 von 126) (Englisch, Französisch)

371611

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Getting started 04

English

FrançaisDeutsch

Nederlands

Italiano Español

Reducing AM reception noise

If AM reception seems particularly poor, or the

AM radio station you’re listening to seems

noisy, try using the Noise Cut feature for better

sound quality.

1 Tune to an AM radio station then press

SHIFT+SETUP.

2Use

/

to choose

TUNERSET

then

press ENTER.

3Use

/

to choose NOISECUT then press

ENTER.

4Use

/

to select the noise cut mode

then press

ENTER

Select an effect level between 1 or 2.

Memorizing stations

This system can memorize up to 30 stations,

stored in three banks, or classes (A, B and C) of

10 stations each.

1 Tune to an AM or FM radio station.

Select mono or auto-stereo reception (FM) as

necessary. These settings are saved along with

the preset.

2 Press

SHIFT+T.EDIT

3 Press

CLASS

to select one of the three

classes, then use the

PRESET

buttons to select

the station preset you want.

You can also use the number buttons to select

a preset.

4 Press

ENTER

After pressing ENTER, the preset class and

number stop blinking and the system

memorize station.

Listening to station presets

You will need to have some presets stored to do

this.

1 Make sure the

TUNER

function is

selected.

2 Press

CLASS

to select the class in which

the channel is stored. Press repeatedly to

cycle through classes A, B and C.

3Use the

PRESET

buttons to select a station

preset.

• You can also use the number buttons to do

this.

Audio input settings from the

TVs (TV Input)

To listen to audio from a flat screen TV on this

device, you will need to connect an audio cable

other than an HDMI cable. From this menu, set

the audio input to that which you would like to

connect. This setting is effective only when

KURO LINK is set to LINK ON and this unit is

connected with a KURO LINK-compatible

Pioneer flat screen TV (see KURO LINK Setup

on page 48).

Select from inputs DIGITAL AUDIO (LINE1),

ANALOG AUDIO (LINE2) and AV

CONNECTOR (LINE3).

1Press

SHIFT+SETUP

and use

/

select

SYS SET

then press

ENTER

Use / to

select

TV INPUT

, then press

ENTER

Use / to

adjust the setting then press

ENTER

to confirm.

Listening to other sources

You can connect auxiliary sources (TV, satellite

receiver, etc.) to this unit for playback through

the speaker system. See Connecting auxiliary

components on page 42 for more on this.

• To connect a USB device to the USB

terminal, see USB playback and Recording

on page 32.

• Bluetooth ADAPTER is selectable when it is

plugged and detected. See Bluetooth

ADAPTER for Wireless Enjoyment of Music

on page 45 for more on this.

1 Make sure that the external source (TV,

satellite receiver, etc.) is switched on.

2Press

LINE

to select the source.

Each press switches between LINE

, LINE

and LINE

3 If necessary, start playback of the source.

04_Getting_started.fm 21 ページ２００９年３月１２日　木曜日　午後１時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer dcs fs 30 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer dcs fs 30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info