Bedienungsanleitung Pioneer DDJ-WeGO (Seite 17 von 20) (Englisch)

491980

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Operation (other functions)

Adjusting the jog dial’s MIDI

message sending interval

This unit is equipped with a mode for adjusting the jog dial’s MIDI mes-

sage sending interval.

Depending on your computer’s operating system and specifications, the

jog dial may not operate properly if the sending interval of MIDI mes-

sage for JOG dial is too short. In this case, follow the procedure below to

adjust the MIDI message sending interval.

! The value set in the jog dial MIDI message sending interval adjust-

ment mode is retained even when this unit’s power is turned off.

1 Turn on the power while pressing the right deck’s

[CTRL A] button and [FX1] button.

The unit starts up in the jog dial MIDI message sending interval adjust-

ment mode. Wait until the startup illumination finishes.

2 Press the [SHIFT] button and select the jog dial’s MIDI

message sending interval.

The sending internal changes in units of 1 ms each time the [SHIFT]

button is pressed.

The jog dial’s MIDI message sending interval is indicated by how the

LEDs on the channel level indicator light.

MIDI message

sending interval

Channel Level Indicator

3 ms*

4 ms

5 ms

6 ms

7 ms

8 ms

9 ms

10 ms

11 ms

12 ms

13 ms

*: Setting upon purchase

! When the [PLAY/PAUSE] button is pressed, the jog dial MIDI mes-

sage sending interval adjustment mode is canceled.

Adjusting the sensitivity of the jog

dial’s touch sensor

This unit is equipped with a mode for adjusting the sensitivity of the jog

dial’s touch sensor.

! The value set in the jog dial sensitivity adjustment mode is retained

even when this unit’s power is turned off.

1 Turn on the power while pressing the left deck’s

[CTRL A] and [FX1] buttons.

The unit starts up in the jog dial sensitivity adjustment mode. Wait until

the startup illumination finishes.

2 Press the [SHIFT] button to select the jog dial’s

sensitivity.

The jog dial’s sensitivity changes each time the [SHIFT] button is

pressed.

The jog dial’s sensitivity is indicated by how the

[HOT CUE (DELETE)/SAMPLER] buttons and [SAMPLER] LEDs light.

Jog dial

sensitivity

LED that lights

–4 (low) Left deck’s [HOT CUE1] button

–3 Left deck’s [HOT CUE2] button

–2 Left deck’s [HOT CUE3] button

–1 Left deck’s [HOT CUE4] button

0* Left and right decks’ [SAMPLER] button

+1 Right deck’s [HOT CUE1] button

+2 Right deck’s [HOT CUE2] button

+3 Right deck’s [HOT CUE3] button

+4 (high) Right deck’s [HOT CUE4] button

*: Setting upon purchase

! The jog dial sensitivity adjustment mode is canceled when the

[PLAY/PAUSE] button is pressed.

Mood lighting mode

When this mode is set, the brightness of the illumination of the left and

right jog dials automatically changes slowly. This can be used as mood

lighting.

! This mode can be set even if no DJ application is running.

Launching the mood lighting mode

Press the [SHIFT], [DECK C] and [DECK D] buttons simultaneously.

! The mood lighting mode is set automatically if no operation is per-

formed for 10 minutes.

Canceling the mood lighting mode

Operate any one of the control panel’s buttons, controls, sliders, jog

dials, etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DDJ-WeGO Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DDJ-WeGO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info