Bedienungsanleitung Pioneer deh 110e (Seite 8 von 107) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Spanisch)

168717

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

Notes

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station’s AF list. (This is only

available when using presets on the F1 or F2

bands.) No preset number appears on the dis-

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

! Sound may be temporarily interrupted by an-

other program during an AF frequency search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the tuner cannot find a suitable station, or

reception status becomes bad, the unit auto-

matically searches for a different station with

the same programming. During the search,

PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 11.

Limiting stations to regional

programming

When AF is used, the regional function limits

the selection of stations broadcasting regional

programs.

1 Press FUNCTION to select REG.

2 Press a or b to turn the regional func-

tion on or off.

Notes

! Regional programming and regional networks

are organized differently depending on the

country (i.e., they may change according to

the hour, state or broadcast area).

! The preset number may disappear from the

display if the tuner tunes in a regional station

which differs from the originally set station.

! The regional function can be turned on or off

independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an

enhanced other network’s TP station (a station

carrying information which cross-references

TP stations).

1 Tune in a TP or enhanced other net-

work’s TP station.

TP indicator lights.

2 Press TA to turn traffic announcement

standby on.

# To turn traffic announcements standby off,

press TA again.

3 Use VOLUME to adjust the TA volume

when a traffic announcement begins.

The newly set volume is stored in memory and

recalled for subsequent traffic announce-

ments.

4 Press TA while a traffic announcement

is being received to cancel the announce-

ment.

The tuner returns to the original source but re-

mains in the standby mode until TA is pressed

again.

# You can also turn the TA function on or off in

the menu that appears with the pressing of

FUNCTION.

Notes

! The system switches back to the original

source following traffic announcement recep-

tion.

! Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM

when TA is on.

Operating this unit

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer deh 110e Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info