Bedienungsanleitung Pioneer deh 1220mp (Seite 7 von 94) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

168914

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Scan play searches for a song within the selected re-

peat range.

1 Press a to turn scan play on.

If you turn scan play on during FLD, FSCN ap-

pears in the display.

2 When you find the desired track press b to turn

scan play off.

If the display has automatically returned to the

playback display, select SCAN again by pressing F

(function).

After scanning of a disc (folder) is finished, nor-

mal playback of the tracks begins.

PAUSE (pause)

1 Press a or b to pause or resume.

COMP OFF (compression and BMX)

Using the COMP (compression) and BMX functions

let you adjust the sound playback quality of this unit.

1 Press a or b to select your favorite setting.

COMP OFF—COMP 1—COMP 2—COMP OFF—

BMX 1—BMX 2

FF/REV (fast forward/reverse)

You can switch the search method between fast for-

ward/reverse and searching every 10 tracks. Selecting

ROUGH enables you to search every 10 tracks.

1 Press d to select ROUGH.

FF/REV – Fast forward and reverse

ROUGH – Searching every 10 tracks

To select FF/REV, press c.

2 Press BAND/ESC to return to the playback dis-

play.

3 Press and hold c or d to search every 10 tracks

on a disc (folder).

If the rest of track number is less than 10, press

and hold c or d recalls the first (last) one.

Audio Adjustments

% Press A (audio) to select the audio func-

tion.

After selecting, perform the following proce-

dures to set the audio function.

FAD (fader/balance adjustment)

You can change the fader/balance setting.

1 Press a or b to adjust front/rear speaker balance.

Adjustment range (front/rear): FAD F15 to FAD

R15

FAD 0 is the proper setting when only two speak-

ers are used.

2 Press c or d to adjust left/right speaker balance.

Adjustment range (left/right): BAL L15 to BAL

R15

BASS/MID/TREBLE (equalizer adjustment)

You can adjust the bass/mid/treble level.

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press a or b to adjust the level.

Adjustment range: +6 to -6

LOUD (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press a or b to turn loudness on or off.

2 Press c or d to select the desired setting.

LOW (low)—HI (high)

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The MW/LW volume level can also be adjusted

with source level adjustments.

1 Press a or b to adjust the source volume.

Adjustment range: SLA +4 to SLA –4

Note

You can also turn loudness on or off by pressing

and holding EQ/LOUD.

Using the equalizer

% Press EQ/LOUD to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

! CUSTOM allows you to create a customized

setting.

! When FLAT is selected no adjustments are

made to the sound.

Operating this unit

English

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer deh 1220mp Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info