Bedienungsanleitung Pioneer deh 1800 (Seite 8 von 106) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

164454

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

% Press LOCAL/BSM repeatedly to turn

local seek tuning on or off.

When local seek tuning is on, LOC appears in

the display.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 16.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 16.

% Press LOCAL/BSM and hold until the

BSM turns on.

BSM begins to flash. While BSM is flashing

the six strongest broadcast frequencies will be

stored under preset tuning buttons 16 in the

order of their signal strength. When finished,

BSM stops flashing.

# To cancel the storage process, press

LOCAL/BSM.

RDS

Introduction of RDS operation

RDS (radio data system) is a system for provid-

ing information along with FM broadcasts.

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AFand TA are only

active when your radio is tuned to an RDS

station.

Switching the RDS display

When you tune in an RDS station its program

service name is displayed. Switch the display

to find out the frequency.

% Press EQ and hold until the display

switches.

Press EQ and hold repeatedly to switch be-

tween the following settings:

Program service namePTY information

Frequency

PTY (program type ID code) information is

listed on page 10.

# PTY information and the frequency of the cur-

rent station appears on the display for eight sec-

onds.

Receiving PTY alarm broadcasts

PTY alarm is a special PTY code for announce-

ments regarding emergencies such as natural

disasters. When the tuner receives the radio

alarm code, ALARM appears on the display

and the volume adjusts to the TA volume.

When the station stops broadcasting the

emergency announcement, the system re-

turns to the previous source.

! An emergency announcement can be can-

celed by pressing TA.

Selecting alternative frequencies

If you are listening to a broadcast and the re-

ception becomes weak or there are other pro-

blems, the unit will automatically search for a

different station in the same network which is

broadcasting a stronger signal.

! The default setting for AF is off.

% Press TA and hold repeatedly to turn AF

on or off.

When AF is on, AF appears in the display.

Notes

! AF should be off for normal tuning operation.

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the stations AF list. (This is only

available when using presets on the F1 band.)

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! When the tuner is tuned to a non-RDS station

the AF indicator flashes.

Operating this unit

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer deh 1800 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info