Bedienungsanleitung Pioneer deh 2200ubb (Seite 8 von 117) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

168915

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

REPEAT (repeat play)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a repeat play range.

For details, refer to Selecting a repeat play range on

the previous page.

3 Press M.C. to confirm the selection.

RANDOM (random play)

1 Press M.C. to turn random play on or off.

PAUSE (pause)

1 Press M.C. to pause or resume.

S.RTRV (sound retriever)

Automatically enhances compressed audio and re-

stores rich sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

For details, refer to Enhancing compressed audio

and restoring rich sound (sound retriever) on the

previous page.

3 Press M.C. to confirm the selection.

Note

Operation is complete even if the menu is can-

celled before being confirmed.

Audio Adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

FAD/BAL (fader/balance adjustment)

You can change the fader/balance setting.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader and balance.

3 Turn M.C. to adjust speaker balance.

Adjustment range (front/rear): F15 to R15

Adjustment range (left/right): L15 to R15

FR 0 is the proper setting when only two speakers

are used.

EQUALIZER (equalizer recall)

There are six stored settings DYNAMIC (dynamic),

VOCAL (vocal), NATURAL (natural), CUSTOM (cus-

tom), FLAT (flat) and POWERFUL (powerful).

! When FLAT is selected no adjustments are made

to the sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

DYNAMIC—VOCAL—NATURAL—CUSTOM—

FLAT—POWERFUL

3 Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustment)

You can adjust the bass/mid/treble level.

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press M.C. to display the setting mode.

2 Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

3 Turn M.C. to adjust the level.

Adjustment range: +6 to -6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—LOW(low)—HIGH (high)

3 Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

! The MW/LW volume level can also be adjusted

with source level adjustments.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Notes

! When selecting FM as the source, you cannot

switch to SLA.

! Operation is complete even if the menu is can-

celled before being confirmed.

Operating this unit

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer deh 2200ubb Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info