Bedienungsanleitung Pioneer deh 2220ub (Seite 9 von 117) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

168916

Zoom out

Zoom in

Vorherige Seite

1/117

Nächste Seite

Initial Settings

Important

Power save mode is cancelled if the vehicle bat-

tery is disconnected and will need to be turned

back on once the battery is reconnected. When

power save is off, depending on connection meth-

ods, the unit may continue to draw power from

the battery if your vehicle's ignition switch doesn't

have an ACC (accessory position).

1 Press SRC/OFF and hold until the unit

turns off.

2 Press SRC/OFF and hold until FM STEP

appears in the display.

3 Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

FM STEP (FM tuning step)

Normally the FM tuning step employed by seek tuning

is 50 kHz. When AF or TA is on, the tuning step auto-

matically changes to 100 kHz. It may be preferable to

set the tuning step to 50 kHz when AF is on.

! The tuning step remains at 50 kHz during manual

tuning.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the FM tuning step.

50 KHZ (50 kHz)—100 KHZ (100 kHz)

3 Press M.C. to confirm the selection.

AUTO-PI (auto PI seek)

The unit can automatically search for a different sta-

tion with the same programming, even during preset

recall.

1 Press M.C. to turn Auto PI seek on or off.

AUX (auxiliary input)

Activate this settin g when using auxiliary device con-

nected to this unit.

1 Press M.C. to turn AUX on or off.

USB (plug and play)

This setting allows you to switch your source to USB

automatically.

1 Press M.C. to turn the plug and play on or off.

ON – When USB storage device is connected, the

source is automatically switched to USB.Ifyou

disconnect your USB storage device, this unit’s

source is turned off.

OFF – When USB storage device is connected,

the source is not switched to USB automatically.

Please change the source to USB manually.

TITLE (multi language)

This unit can display the text information of a com-

pressed audio file even if they are embedded in a

Western European or Russian language.

! If the embedded language and the selected lan-

guage setting are not the same, text information

may not be displayed properly.

! Some characters may not be displayed properly.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

EUROPEAN (European)—RUSSIAN (Russian)

3 Press M.C. to confirm the selection.

PW SAVE (power saving)

Switching this function on enables you to reduce the

consumption of battery power.

! Turning on the source is the only operation al-

lowed when this function is on.

1 Press M.C. to turn the power save on or off.

Note

Operation is complete even if the menu is can-

celled before being confirmed.

Using the AUX source

1 Insert the stereo mini plug into the

AUX input jack.

2 Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on this page.

Operating this unit

English

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer deh 2220ub Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info