Bedienungsanleitung Pioneer DEH-6200BT (Seite 1 von 8) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

454466

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

<YRD5313-B/S> <1> <YRD5313-B/S> <2> <YRD5313-B/S> <3> <YRD5313-B/S> <4>

Installation English Installation English

Printed in China

Imprimé en Chine

<YRD5313-B/S> EW

Installation Manual

Manuel d’installation

Manuale d’installazione

Manual de instalación

Installationsanleitung

Installatiehandleiding

Руководство по установке

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

DEH-6200BT

2. Tighten two screws on each side.

Dashboard or ConsoleMounting bracket

Tapping screw (5 mm × 8 mm)

Removing the unit

1. Extend top and bottom of the trim

ring outwards to remove the trim

ring. (When reattaching the trim ring,

point the side with the groove down.)

Trim ring

• Releasing the front panel allows easier access

to the trim ring.

2. Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3. Pull the unit out of the dashboard.

Fastening the front panel

If you do not plan to detach the front panel,

the front panel can be fastened with supplied

screw.

Screw

Note

• Check all connections and systems before final

installation.

• Do not use unauthorized parts. The use of

unauthorized parts may cause malfunctions.

• Consult with your dealer if installation requires

drilling of holes or other modifications of the

vehicle.

• Do not install this unit where:

— it may interfere with operation of the vehicle.

— it may cause injury to a passenger as a result

of a sudden stop.

• The semiconductor laser will be damaged if it

overheats. Install this unit away from hot places

such as near the heater outlet.

• Optimum performance is obtained when the unit is

installed at an angle of less than 60°.

60°

• When installing, to ensure proper heat dispersal

when using this unit, make sure you leave ample

space behind the rear panel and wrap any loose

cables so they are not blocking the vents.

DIN front/rear-mount

This unit can be properly installed either from

“Front” (conventional DIN Front-mount) or

“Rear” (DIN Rear-mount installation, utilizing

threaded screw holes at the sides of unit

chassis). For details, refer to the following

installation methods.

• Use commercially available parts when

installing.

DIN Front-mount

1. Insert the mounting sleeve into the

dashboard.

For installation in shallow spaces, use the

supplied mounting sleeve. If there is enough

space, use the mounting sleeve that came with

the vehicle.

2. Secure the mounting sleeve by using

a screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Mounting sleeve

3. Install the unit as illustrated.

Screw (M4×8)

Screw

Metal strap

Nut

Firewall or

metal support

• Make sure that the unit is installed securely

in place. An unstable installation may cause

skipping or other malfunctions.

DIN Rear-mount

1. Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

Leave ample space

Dashboard

10 cm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-6200BT Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-6200BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info