Bedienungsanleitung Pioneer DEH-6200BT (Seite 16 von 32) (Englisch)

454466

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to switch the BD address

and device name.

3 Press M.C. to display Delete YES.

4 Press M.C. to delete a cellular phone information

from the device list.

! While this function is in use, do not turn off the

engine.

Add device (connecting a new cellular phone)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

2 Turn M.C. to select a device from the device list.

! If the desired device is not displayed, select

Search again.

3 Press and hold M.C. to switch the BD address

and device name.

4 Press M.C. to connect the selected cellular

phone.

! To complete the connection, check the device

name (DEH-6200BT) and enter the link code

on your cellular phone.

! PIN code is set to 0000 as the default. You

can change this code. Refer to PIN code (PIN

code input) on the previous page.

! If five devices are already paired, Memory full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

SPCL. Device (setting a special device)

Bluetooth devices that are difficult to establish a con-

nection with are called special devices. If your Blue-

tooth device is listed as a special device, select the

appropriate one.

1 Press M.C. to display the setting mode.

2 Use M.C. to select a special device.

Turn to change the menu option. Press to select.

! If five devices are already paired, Memory full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

3 Turn M.C. to display this unit’s device name, BD

address and pincode.

4 Use a cellular phone to connect to this unit.

! To complete the connection, check the device

name (DEH-6200BT) and enter the link code

on your cellular phone.

! PIN code is set to 0000 as the default. You

can change this code. Refer to PIN code (PIN

code input) on the previous page.

Auto CONN (connecting to a Bluetooth device auto-

matically)

1 Press M.C. to turn automatic connection on or

off.

Visible (setting the visibility of this unit)

To check the availability of this unit from other de-

vices, Bluetooth visibility of this unit can be turned

on.

1 Press M.C. to turn the visibility of this unit on or

off.

! While setting SPCL. Device, Bluetooth visibi-

lity of this unit is turned on temporarily.

PIN code (PIN code input)

To connect your cellular phone to this unit via Blue-

tooth wireless technology, you need to enter a PIN

code on your phone to verify the connection. The de-

fault code is 0000, but you can change it with this

function.

1 Press M.C. to display the setting mode.

2 Push M.C. up or down to select a number.

3 Push M.C. right to move the cursor to the next po-

sition.

4 After inputting PIN code, press and hold M.C.

PIN code can be stored in memory.

! After inputting 8 digits PIN code, push M.C.

right to store in memory.

! After inputting, pushing M.C. right or pressing

M.C. returns you to the PIN code input dis-

play, and you can change the PIN code.

Section

Operating this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-6200BT Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-6200BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info