Bedienungsanleitung Pioneer DEH-X3700UI (Seite 15 von 64) (Englisch)

574476

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

15En

English

When using a subwoofer of 70 W (2 Ω),

be sure to connect the subwoofer to the

olet and violet/black leads of this unit.

Do not connect anything to the green

and green/black leads.

Not used.

Subwoofer (4 Ω) × 2

Orange/white (Only for DEH-X3700UI/

X3710UI)

Connect to a car’s illumination signal.

NOTE

Change the initial menu of this unit. Refer

o [SP-P/O MODE] (page 7). The subwoofer

output of this unit is monaural.

Power amp (sold separately)

Perform these connections when using the

optional amplifier.

System remote control

Connect to blue/white cable.

Power amp (sold separately)

Connect with RCA cables (sold

separately)

To front output

Front speaker

To rear output or subwoofer output

Rear speaker or subwoofer

Important

• C

heck all connections and systems before

final installation.

• D

o not use unauthorized parts as this

may cause malfunctions.

• C

onsult your dealer if installation requires

drilling of holes or other modifications to

the vehicle.

• Do

not install this unit where:

–it may interfere with operation of the

vehicl

–it may cause injury to a passenger as a

esult of a sudden stop.

• T

he semiconductor laser will be damaged

if it overheats. Install this unit away from

hot places such as near the heater outlet.

• O

ptimum performance is

obtained when the unit is

installed at an angle of less

than 60°.

• W

hen installing, to ensure proper heat

dispersal when using this unit, make sure

you leave ample space behind the rear

panel and wrap any loose cables so they

are not blocking the vents.

DIN front/rear mount

This unit can be properly installed using

either front-mount or rear-mount

installation.

Use commercially available parts when

stalling.

DEH-X3700UI/X3710UI

DEH-X2700UI/X2710UI

Installation

Leave ample

space

5 cm

DIN Front-mount

1 Insert the mounting sleeve into the

dashboard.

For installation in shallow spaces, use

he supplied mounting sleeve. If there is

enough space, use the mounting sleeve

that came with the vehicle.

2 Secure the mounting sleeve by using a

screwdriver to bend the metal tabs

(90°) into place.

Dashboard

Mounting sleeve

• Mak

e sure that the unit is installed

securely in place. An unstable

installation may cause skipping or

other malfunctions.

DIN Rear-mount

1 Determine the appropriate position

where the holes on the bracket and

the side of the unit match.

2 Tighten two screws on each side.

Screw

Mounting bracket

Dashboard or console

• Use eit

her truss (5 mm × 8 mm) or

flush surface (5 mm × 9 mm) screws,

epending on the bracket screw

holes.

Removing the unit

1 Remove the trim ring.

Trim ring

Notched tab

• Rel

easing the front panel allows easier

access to the trim ring.

• When reat

taching the trim ring, point

the side with the notched tab down.

2 Insert the supplied extraction keys

into both sides of the unit until they

click into place.

3 Pull the unit out of the dashboard.

To secure the front panel

The front panel can be secured with the

supplied screw.

Screw

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X3700UI Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X3700UI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info