Bedienungsanleitung Pioneer DEH-X7500SD (Seite 20 von 44) (Englisch)

525991

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Delete device (deleting a device from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to display Delete YES.

4 Press M.C. to delete the device information from

the device list.

! While this function is in use, do not turn off the

engine.

Add device (connecting a new device)

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, Not found is displayed.

2 Turn M.C. to select a device from the device list.

! Press and hold M.C. to swap between the

Bluetooth device address and the device

name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit). Enter the PIN code

on your device if necessary.

! PIN code is set to 0000 as the default. You

can change this code.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

Auto connect (connecting to a Bluetooth device

automatically)

1 Press M.C. to turn automatic connection on or

off.

Visibility (setting the visibility of this unit)

Bluetooth visibility can be turned on so that other de-

vices can discover the unit.

1 Press M.C. to turn the visibility of this unit on or

off.

Pin code input (PIN code input)

You must enter a PIN code on your device to confirm

the Bluetooth connection. The default code is 0000,

but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you to

the PIN code input display, and you can

change the PIN code.

Device INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the desired setting.

Device name—Bluetooth device address

Phone menu operation

Important

Be sure to park your vehicle in a safe place and

apply the parking brake when performing this op-

eration.

1 Press to display the phone menu.

2 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

Missed calls (missed call history)

Dialed calls (dialed call history)

Received calls (received call history)

1 Press M.C. to display the phone number list.

2 Turn M.C. to select a name or phone number.

3 Press M.C. to make a call.

! To display details about the contact you selected,

press and hold M.C.

PhoneBook (phone book)

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X7500SD Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X7500SD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info