Bedienungsanleitung Pioneer DEH-X8500DAB (Seite 9 von 44) (Englisch)

525989

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

This unit stores recent broadcasts to memory

automatically. The memory capacity of this

unit will vary depending on the bit rate of the

Ser vice Component used. The approximate

memory capacity is five minutes for 192 kbps.

Stored selections that are older than what can

be stored in the memory will not be available.

Selecting a Service Component

You can select a Service Component from the

following service list.

1 Press

(list) to switch to the service

list mode.

2 Turn M.C. to change the service list and

press to select.

Once selected, the following Service Compo-

nent functions can be adjusted.

SERVICE (service label)

You can select a Service Component from the list of

all components.

1 Turn M.C. to select a Service Component.

2 Press M.C. to receive a broadcast from the se-

lected Service Component.

Using alphabet search

1 Press

(list).

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

4 Turn M.C. to select a Service Component.

5 Press M.C. to receive a broadcast from the se-

lected Service Component.

PROGRAM TYPE (PTY label)

You can select a Service Component from PTY infor-

mation.

1 Turn M.C. to scroll to the desired PTY information

and press it to select.

NEWS/INFO—POPULAR—CLASSICS—OTHERS

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

ENSEMBLE (ensemble label)

You can select a Service Component from the relevant

ensemble.

1 Turn M.C. to scroll to the desired ensemble and

press it to select.

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

PCH LIST (setting preset channels)

You can store your favorite Service Components as

presets and recall them later on.

1 Turn M.C. to select a preset channel.

2 Press and hold M.C. to store the Service Compo-

nent as a preset.

3 Press M.C. to recall the preset channel.

! You can tune the channel up or down manu-

ally by pressing

or .

Updating service list information

You can receive updates to the service list.

% Press and hold down

(list).

To cancel, press and hold

(list) again.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

Once selected, the function below can be ad-

justed.

S.FOLLOW (alternative Service Component search)

If the tuner cannot get good reception, the unit will

automatically search for another ensemble that sup-

ports the same Service Component. If no alternative

Service Component can be found or recep tion re-

mains poor, this function will automatically switch to

an identical FM broadcast.

1 Press M.C. to turn alternative Service Component

search on or off.

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X8500DAB Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X8500DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info