Bedienungsanleitung Pioneer DEH-X9500BT (Seite 22 von 40) (Englisch)

526031

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Pause (pause)

1 Press M.C. to pause or resume.

Sound Retriever (sound retriever)

1 Press M.C. to select the desired setting.

1—2—OFF (off)

1 is effective for low compression rates, and 2 is

effective for high compression rates.

Audio adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

Once selected, the following audio functions

can be adjusted.

! The cut-off frequency and output level can

be adjusted when the subwoofer output is

on.

! SLA is not available when FM is selected as

the source.

Fader/Balance (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader (front/rear) and

balance (left/right).

3 Turn M.C. to adjust the front/rear speaker bal-

ance.

Turn M.C. to adjust the left/right speaker balance.

Preset EQ (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select an equalizer curve.

Powerful—Natural—Vocal—Custom1—Cus-

tom2—Flat—SuperBass

G.EQ (equalizer adjustment)

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are stored in Custom1 or Custom2.

! Custom1 can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

! USB, iPod, SD, and Apps (iPhone)

! BTAudio, and Apps (Android)

! Custom2 is a shared setting used in common for

all sources.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the following:

Equalizer band—Equalizer level

3 Turn M.C. to select the desired setting.

Equalizer band: 100Hz—315Hz—1.25kHz—

3.15kHz—8kHz

Equalizer level: +6 to –6

Loudness (loudness)

Loudness compensates for deficiencies in the low-fre-

quency and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn loudness on or off.

3 Turn M.C. to select the desired setting.

Low (low)—Mid (mid)—High (high)

Subwoofer1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output which

can be turned on or off.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn subwoofer output on or off.

3 Turn M.C. to select the phase for the subwoofer

output.

Turn M.C. to the left to select reverse phase, and

Reverse appears in the display. Turn M.C. to the

right to select normal phase, and Normal appears

in the display.

Subwoofer2 (subwoofer adjustment)

Only frequencies lower than those in the selected

range are outputted from the subwoofer.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between the cut-off frequency

and the output level for the subwoofer.

3 Turn M.C. to select the cut-off frequency.

50Hz—63Hz—80Hz—100Hz—125Hz

4 Turn M.C. to adjust the output level for the sub-

woofer.

+6 to –24 is displayed as the level is increased or

decreased.

Bass Booster (bass boost)

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X9500BT Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X9500BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info