Bedienungsanleitung Pioneer DEH-X9500BT (Seite 28 von 40) (Englisch)

526031

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

4 Turn M.C. to select the set up menu

function.

Once selected, the following set up menu

functions can be adjusted.

! Software Update is not available for DEH-

X9500SD.

FM step (FM tuning step)

Normally, the FM tuning step setting used for seek

tuning is 50 kHz. The tuning step changes to 100 kHz

automatically when the alternative frequencies

search or traffic announcement standby function is in

use. It may be preferable to set the tuning step to

50 kHz when the alternative frequencies search func-

tion is on.

1 Press M.C. to select the FM tuning step.

50kHz (50 kHz)—100kHz (100 kHz)

S/W control (rear output and subwoofer setting)

This unit’s rear output (rear speaker leads output and

RCA rear output) can be used for full-range speaker

(Rear SP :F.Range) or subwoofer (Rear SP :S/W) con-

nection. If you switch the rear output setting to Rear

SP :S/W, you can connect a rear speaker lead directly

to a subwoofer without using an auxiliary amp.

1 Press M.C. to switch the rear output setting.

! When no subwoofer is connected to the rear

output, select Rear SP :F.Range (full-range

speaker).

! When a subwoofer is connected to the rear

output, select Rear SP :S/W (subwoofer).

! Even if you change this setting, there will be no

output unless you turn the subwoofer output on

(refer to Subwoofer1 (subwoofer on/off setting)

on page 22).

! If you change this setting, subwoofer output in

the audio menu will return to the factory settings.

! Both rear speaker lead outputs and RCA rear out-

put are switched simultaneously in this setting.

Software Update (updating the software)

This function is used to update this unit with the lat-

est Bluetooth software. For about Bluetooth software

and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to display the data transfer mode.

Follow the on-screen instructions to finish updat-

ing the Bluetooth software.

System menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press and hold M.C. until the main

menu appears in the display.

3 Turn M.C. to change the menu option

and press to select SYSTEM.

4 Turn M.C. to select the system menu

function.

For details, refer to System menu on page

26.

Using an AUX source

1 Insert the stereo mini plug into the

AUX input jack.

2 Press SRC/OFF to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on the previous page.

If an unwanted display

appears

Turn off the unwanted display using the proce-

dures listed below.

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select SYSTEM.

3 Turn M.C. to display DEMO OFF and

press to select.

4 Turn M.C. to switch to YES.

5 Press M.C. to select.

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X9500BT Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X9500BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info