Bedienungsanleitung Pioneer DEH-X9500SD (Seite 10 von 40) (Englisch)

526032

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

When Alternative FREQ is used, the regional func-

tion limits the selection of stations to those broad-

casting regional programs.

1 Press M.C. to turn the regional function on or off.

Local (local seek tuning)

Local seek tuning allows you to tune in to only those

radio stations with sufficiently strong signals for good

reception.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn local on or off.

3 Turn M.C. to select the desired setting.

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

PTY search (program type selection)

You can tune in to a station using PTY (program type)

information.

1 Turn LEVER left or right to select the desired set-

ting.

News&Inf—Popular—Classics—Others

2 Press M.C. to begin the search.

The unit searches for a station broadcasting that

type of program. When a station is found, its pro-

gram service name is displayed.

PTY (program type ID code) information is listed

in the following section. Refer to PTY list on page

To cancel the search, press M.C. again.

The program of some stations may differ from

that indicated by the transmitted PTY.

If no station is broadcasting the type of program

you searched for, Not found is displayed for

about two seconds and then the tuner returns to

the original station.

Traffic Announce (traffic announcement standby)

1 Press M.C. to turn traffic announcement standby

on or off.

Alternative FREQ (alternative frequencies search)

When the tuner cannot get a good reception, the unit

automatically searches for a different station in the

same network.

1 Press M.C. to turn the alternative frequencies

search on or off.

News interrupt (news program interruption)

1 Press M.C. to turn the NEWS function on or off.

Tuning Mode (LEVER tuning setting)

You can assign a function to the LEVER on the unit.

Select Manual (manual tuning) to tune up or down

manually or select Preset (preset channel) to switch

between preset channels.

1 Press M.C. to select Manual or Preset.

CD/CD-R/CD-RW and external

storage devices (USB, SD)

Basic operations

DEH-X9500BT

75 64

DEH-X9500SD

764

1 Bit rate/sampling frequency indicator

Shows the bit rate or sampling frequency of

the current track (file) when the compressed

audio is playing.

! When playing back VBR (variable bit

rate)-recorded AAC files, the average bit

rate value is displayed. However, de-

pending on the software used to decode

AAC files, VBR may be displayed.

2 Folder number indicator

Shows the current folder number when play-

ing a compressed audio file.

3 Track number indicator

4 PLAY/PAUSE indicator

5 S.Rtrv indicator

Appears when Sound Retriever function is on.

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X9500SD Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X9500SD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info