Bedienungsanleitung Pioneer DEH-X9600BT (Seite 9 von 40) (Englisch)

574466

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Black plate (9,1)

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

3 Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

! If MW/LW band is selected, only BSM,

Local and Tuning Mode are available.

FM Setting (FM sound quality settings)

The sound quality level can be set to match the broad-

cast signal conditions of the FM band signal.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

! Standard – This is the standard setting.

! Hi-Fi – This is the setting to use to prioritize

the high quality of stereo sound.

! Stable – This is the setting to use to prioritize

the low noise of monaural sound.

BSM (best stations memory)

BSM (best stations memory) automatically stores the

six strongest stations in the order of their signal

strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

Regional (regional)

When Alternative FREQ is used, the regional func-

tion limits the selection of stations to those broad-

casting regional programs.

1 Press M.C. to turn the regional function on or off.

Local (local seek tuning)

Local seek tuning allows you to tune in to only those

radio stations with sufficiently strong signals for good

reception.

1 Press M.C. to display the setting mode.

2 Press M.C. to turn local on or off.

3 Turn M.C. to select the desired setting.

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The highest level setting allows reception of only

the strongest stations, while lower levels allow the

reception of weaker stations.

PTY search (program type selection)

You can tune in to a station using PTY (program type)

information.

1 Press M.C. to display the setting mode.

2 Turn LEVER left or right to select the desired set-

ting.

News&Inf—Popular—Classics—Others

3 Press M.C. to begin the search.

The unit searches for a station broadcasting that

type of program. When a station is found, its pro-

gram service name is displayed.

! To cancel the search, press M.C. again.

! The program of some stations may differ from

that indicated by the transmitted PTY.

! If no station is broadcasting the type of pro-

gram you searched for, Not found is dis-

played for about two seconds and then the

tuner returns to the original station.

Traffic Announce (traffic announcement standby)

1 Press M.C. to turn traffic announcement standby

on or off.

Alternative FREQ (alternative frequencies search)

When the tuner cannot get a good reception, the unit

automatically searches for a different station in the

same network.

1 Press M.C. to turn the alternative frequencies

search on or off.

News interrupt (news program interruption)

1 Press M.C. to turn the NEWS function on or off.

Tuning Mode (LEVER tuning setting)

You can assign a function to the LEVER on the unit.

Select Manual (manual tuning) to tune up or down

manually or select Preset (preset channel) to switch

between preset channels.

1 Press M.C. to select Manual or Preset.

<QRB3358-A>9

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X9600BT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X9600BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info