Bedienungsanleitung Pioneer DEH-X9600BT (Seite 27 von 40) (Englisch)

574466

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Black plate (27,1)

Bluetooth device data stored on this unit can be

cleared. To protect your personal information, clear

the device memory before you pass the unit on to

someone else. The following information will be de-

leted.

Device list/PIN code/call history/phone book

1 Press M.C. to show the confirmation display.

Clear memory YES is displayed. Clearing mem-

or y is now on standby.

If you do not want to clear the Bluetooth device

data stored on this unit, turn M.C. to display Can-

cel and press it again to select.

2 Press M.C. to clear the memory.

Cleared is displayed and the Bluetooth device

data is cleared.

! While this function is in use, do not turn off

the engine.

BT Version Info. (Bluetooth version display)

You can display the system versions of this unit and

of Bluetooth module.

APP CONNECT MODE (APP connect mode setting)

Select an appropriate option for your connected de-

vice.

1 Press M.C. to select the desired setting.

Wired (for iPhone)—Bluetooth (for smartphone)

! This setting is not available when the source is set

to App.

Set up menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press M.C. to display the main menu.

3 Turn M.C. to change the menu option

and press to select SETUP.

4 Turn M.C. to select the set up menu

function.

Once selected, the following set up menu

functions can be adjusted.

FM step (FM tuning step)

1 Press M.C. to select the FM tuning step.

100kHz (100 kHz)—50kHz (50 kHz)

S/W control (rear output and subwoofer setting)

This unit’s rear output (rear speaker leads output and

RCA rear output) can be used for full-range speaker

(Rear SP :F.Range) or subwoofer (Rear SP :S/W) con-

nection. If you switch the rear output setting to Rear

SP :S/W, you can connect a rear speaker lead directly

to a subwoofer without using an auxiliary amp.

1 Press M.C. to switch the rear output setting.

! When no subwoofer is connected to the rear

output, select Rear SP :F.Range (full-range

speaker).

! When a subwoofer is connected to the rear

output, select Rear SP :S/W (subwoofer).

! Even if you change this setting, there will be no

output unless you turn the subwoofer output on

(refer to Subwoofer1 (subwoofer on/off setting)

on page 22).

! If you change this setting, subwoofer output in

the audio menu will return to the factory settings.

! Both rear speaker lead outputs and RCA rear out-

put are switched simultaneously in this setting.

Software Update (updating the software)

This function is used to update this unit with the lat-

est Bluetooth software. For about Bluetooth software

and updating, refer to our website.

! Never turn the unit off while the Bluetooth soft-

ware is being updated.

1 Press M.C. to start updating.

Follow the on-screen instructions to finish updat-

ing the Bluetooth software.

System menu

1 Press and hold SRC/OFF until the unit

turns off.

2 Press M.C. to display the main menu.

3 Turn M.C. to change the menu option

and press to select SYSTEM.

4 Turn M.C. to select the system menu

function.

For details, refer to System menu on page

26.

<QRB3358-A>27

Section

Using this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X9600BT Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEH-X9600BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info