Bedienungsanleitung Pioneer DEX-P99RS (Seite 32 von 75) (Englisch)

491816

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

2 Push MULTI-CONTROL left or right to

select the time alignment.

Each time MULTI-CONTROL is pushed left or

right, time alignment is selected in the follow-

ing order:

Initial (initial)—Custom (custom)—AutoTA

(auto-time alignment)—OFF (off)

! Initial is the factory supplied time align-

ment.

! Custom is an adjusted time alignment that

you created.

! AutoTA is the time alignment created by

auto TA and EQ. (Refer to Auto TA and EQ

(auto-time alignment and auto-equalizing)

on page 34.)

# You cannot select AutoTA if auto TA and EQ

has not been carried out. In this case,

Please Set Auto TA appears.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment is memorized

in Custom.

1 Use MULTI-CONTROL to select TA1 in

the audio function menu.

Refer to Introduction of audio adjustments on

page 27.

2 Press MULTI-CONTROL to select a unit

of distance.

Each press of MULTI-CONTROL selects the

unit of distance in the following order:

(cm) (centimeter)—(inch) (inch)

3 Use MULTI-CONTROL to select TA2 in

the audio function menu.

Refer to Introduction of audio adjustments on

page 27.

# Can't Adjust TA. Set POS. FL or FR appears

when neither Left nor Right is selected in the po-

sition selector mode (POSI).

# When selecting OFF in TA1, you cannot

switch to TA2.

4 Push MULTI-CONTROL left or right to

select the speaker to be adjusted.

Each time MULTI-CONTROL is pushed left or

right, the speaker is selected in the following

order:

High L (high-range left)—High R (high-range

right)—Mid L (middle-range left)—Mid R

(middle-range right)—Low L (low-range left)—

Low R (low-range right)—SW L (subwoofer

left)—SW R (subwoofer right)

5 Push MULTI-CONTROL up or down to

adjust the distance between the selected

speaker and the listening position.

Each time MULTI-CONTROL is pushed up or

down, the distance increases or decreases.

394.75cm to 0.00cm is displayed as the dis-

tance is increased or decreased, if you have

selected centimeters ((cm)).

155.39inch to 0.00inch is displayed as the dis-

tance is increased or decreased, if you have

selected inches ((inch)).

# You can adjust the distance for the other

speakers in the same way.

6 Press B to cancel the time alignment

mode.

Recalling or copying

equalizer curves

The equalizer lets you adjust the equalization

to match the car’s interior acoustic character-

istics as desired.

It is possible to store the adjusted equalizer

curve in the memory, or recall the stored

equalizer curve from the memory.

Recalling the equalizer curve

1 Use MULTI-CONTROL to select EQ 1 in

the audio function menu.

Refer to Introduction of audio adjustments on

page 27.

Audio Adjustments

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEX-P99RS Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEX-P99RS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info