Bedienungsanleitung Pioneer DJM-250 (Seite 11 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

491998

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

English

3 Move the crossfader f gradually towards the right.

While checking the sound output from the speakers, operate the cross-

fader to substitute the sound of [CH-1] with the sound of [CH-2].

Mixing is completed once only the [CH-2] sound is being output from the

speakers.

Using the filter function (filter

section)

LPFHPF LPF HPF

SOUND COLOR FILTER

1 2

Each channel is equipped with a SOUND COLOR FILTER function by

which filter effects can be achieved simply by turning a large control.

The treble or bass sound can be removed by turning the

[SOUND COLOR FILTER] control h.

Turn the [CH-1] 1 or [CH-2] 2 [SOUND COLOR FILTER]

control h.

The effect is applied to the sound and the indicator’s color changes.

The effect type and indicator color differs according to the direction in

which the [FILTER] control is turned, as shown on the table below.

Direction of

rotation

Description of effect Indicator

Left

Applies the effect of the

treble sound fading out.

(LPF: low pass filter)

Red (flashing)

Center — Orange (lit)

Right

Applies the effect of the bass

sound fading out.

(HPF: high pass filter)

Green (flashing)

Mixing using the SOUND COLOR FILTER

control

Prepare the unit in advance so that the sound of [CH-1] 1 is being out-

put from the speakers. For instructions on preparation, see Outputting

sound on page 10.

For instructions on monitoring the sound, see Monitoring the sound over

headphones (headphones section) on page 12.

1 Operate the crossfader and [CH-2] 2.

Operate as described in steps 2 to 6 under Mixing using the channel

faders on page 10.

2 Turn the [CH-2] 2 [SOUND COLOR FILTER] control h

fully clockwise.

3 Move the [CH-2] 2 channel fader e away from you.

4 While turning the [CH-1] 1 [SOUND COLOR FILTER]

control h counterclockwise from the center, turn the

[CH-2] 2 [SOUND COLOR FILTER] control h towards the

center.

While checking the sound output from the speakers, operate the

[SOUND COLOR FILTER] controls h and replace the [CH-1] and [CH-2]

sound.

Move the [CH-1] 1 channel fader e towards the front. Mixing is com-

pleted once only the sound of [CH-2] is output from the speakers.

Selecting the crossfader’s curve

characteristics (crossfader section)

THRU

CROSS FADER

— [THRU]: Choose this when you do not want to use the crossfader.

— [

]: Set here for a curve that rises gradually.

— [ ]: Set here for a curve that rises steeply. (When the crossfader

moves away from either the left or right edge, the sound is immedi-

ately output from the opposite side.)

Starting playback of a Pioneer DJ

player using the fader (fader start

section)

FADER START

CH-1 CH-2

If you connect a Pioneer DJ player using a control cable (supplied with

a DJ player), you can start playback of control other operations of the DJ

player with the fader of this unit.

The fader start function can only be used when connected to a Pioneer

DJ player.

Connect this unit and Pioneer DJ player beforehand. For instructions on

connections, see Connecting the input/output terminals on page 6.

To start playback using the channel

faders

1 Set [THRU, , ] (the crossfader curve selector

switch) j to [THRU].

2 Press the [CH-1] or [CH-2] button i in the fader start

section.

Turn the fader start function on.

3 Move the channel fader e to the very front.

4 Set the cue on the DJ player.

The DJ player pauses playback at the cue point.

5 Move the channel fader e away from you.

Playback starts on the DJ player.

! If you set the channel fader back to the original position, the player

instantaneously returns to the cue point already set and pauses

playback (back cue).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DJM-250 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info