Bedienungsanleitung Pioneer dv 370 (Seite 21 von 28) (Englisch)

136582

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Additional information

English

Please note that many widescreen discs override the player’s settings so that the disc is shown in

letter box format regardless of the setting.

Note

•Using the 16:9 (Wide) setting with a standard 4:3 TV, or either of the 4:3 settings with a

widescreen TV, will result in a distorted picture.

Setting the TV system

The default setting of this player is AUTO, and unless you notice that the picture is distorted when

playing some discs, you should leave it set to AUTO. If you experience picture distortion with some

discs, set the TV system to match your country or region’s system. Doing this, however, may restrict

the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each

setting (AUTO, PAL and NTSC).

1 If the player is on, press  STANDBY/ON to switch it to standby.

2Using the front panel controls, hold down  then press  STANDBY/ON to switch the

TV system.

The TV system changes as follows:

• AUTO  NTSC

• NTSC  PAL

• PAL  AUTO

Note

• You have to switch the player into standby (press  STANDBY/ON) before each change.

Resetting the player

Use this procedure to reset all the player’s settings to the factory default.

1Switch the player into standby.

2Using the front panel buttons,

hold down the  (stop) button and press

 STANDBY/ON to switch the player back on.

All the player’s settings are now reset.

Power reset

Use this procedure to switch the power off if the player is unresponsive to any control from the front

panel or remote.

1 Press and hold the front panel  STANDBY/ON for 10 seconds.

When the power is completely off, you cannot use the remote to switch it back on again. Use the

front panel  STANDBY/ON button.

DVD-Video regions

All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of

the world the disc is compatible with. Your DVD player also has a region mark, which you can find

on the rear panel. Discs from incompatible regions will not play in this player. Discs marked ALL will

play in any player.

The diagram below shows the various DVD regions of the world.

Selecting languages using the language code list

Some of the language options (such as ‘DVD Language’ in the Setup Navigator) allow you to set your

prefered language from any of the 136 languages listed in the language code list on page 22.

1 Select ‘Other Language’.

2Use the / (cursor left/right) buttons to select either a code letter or a code number.

3Use the / (cursor up/down) buttons to select a code letter or a code number.

See Language code list on page 22 for a complete list of languages and codes.

Disc Player setting

Type Format NTSC PAL AUTO

DVD/Super VCD NTSC

NTSC PAL NTSC

PAL

NTSC PAL PAL

Video CD NTSC

NTSC PAL NTSC

PAL

NTSC PAL PAL

CD/

no disc

—

NTSC PAL NTSC or PAL

DV370_En_A5New.book Page 21 Thursday, April 1, 2004 6:16 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer dv 370 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer dv 370

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info