138248
84
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
84
En
Connection of mouse and keyboard
A commercially available PS/2 mouse or PS/2 keyboard can be
connected to this units mouse/keyboard connector as follows.
1.Turn this unit’s POWER off to set it to the
standby mode.
2.Connect the PS/2 mouse or PS/2 keyboard
to this unit’s mouse/keyboard connector.
3.Turn this unit’s POWER ON.
Connection is now complete.
If you want to use both the mouse and keyboard, connect
them using a commercially available Y cable.
Note:
÷
The power rating of this mouse/keyboard connector is
no more than 5V 100mA. Do not use a mouse or key-
board with a current drain exceeding the rating of 100mA.
÷
Certain commercially available PS/2 mouse models, PS/
2 keyboard models and Y cables may not be compat-
ible with this unit. For details, please consult PIONEER
technical support.
TV SYSTEM selector
Video output changes as follows according to the playback discs
recorded format.
NTSC-PAL, PAL-NTSC conversion is possible on Video CDs.
PAL-NTSC conversion is not possible on DVDs. When the TV
SYSTEM selector is set to the AUTO position, the discs format
will be output as is. When a CD or disc is not loaded, the previ-
ous video output will be selected.
About MOD. (Modulation) PAL
Most model of the newly developed countdown PAL TV sys-
tem detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch
vertical amplitude, resulting in a display without vertical shrink-
age. On some TVs, the picture may shrink vertically, leaving
black bands at the top and bottom of the screen. This is not
malfunction; it is caused by the NTSC-PAL conversion.
If your PAL TV does not have a V-Hold control, you may not
be able to view NTSC disc because the picture may roll. If the
TV has V-Hold control, adjust it until the picture stop rolling.
Disc
Type Format
DVD NTSC
PAL
Video CD NTSC
PAL
CD, No disc
Output format
Position of TV SYSTEM selector
NTSC PAL AUTO
NTSC MOD. PAL NTSC
––– PAL PAL
NTSC MOD. PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or PAL
AUTO
NTSC
PAL
TV SYSTEM
Y cable
Connecting the player
84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer dvd v 7300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info