Bedienungsanleitung Pioneer DVH-3200UB (Seite 28 von 44) (Englisch)

649377

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

! With some discs, the parental lock may be ac-

tive only for certain levels of scenes. The play-

back of those scenes will be skipped. For

details, refer to the instruction manual that

came with the disc.

Changing the level

You can change the set parental lock level.

1 Move the thumb pad up or down to select PAR-

ENTAL in GEN.

2 Click the thumb pad

Parental lock setting menu is displayed.

3 Press 0 to 9 to input the registered code number.

4 Move the thumb pad left or right to move the cur-

sor to the previous or next position.

5 Click the thumb pad after entering the four digit

code number.

This sets the code number, and the level can now

be changed.

! If you input an incorrect code number, the

icon

is displayed. Input the correct code

number.

! If you forget your code number, refer to If you

forget your code number on this page.

6 Move the thumb pad left or right to select the de-

sired level.

7 Click the thumb pad

The parental lock level is set.

If you forget your code number

Please see the following section, and press CLEAR 10

times in the parental lock setting menu. Refer to

Changing the level on this page. The registered code

number is canceled, letting you register a new one.

Setting the DivX subtitle file

You can select whether or not to display DivX external

subtitles.

! The DivX subtitles will be displayed even when

CUSTOM is selected if no DivX external subtitle

files exist.

1 Move the thumb pad up or down to select DivX

SUBTITLE in GEN.

2 Click the thumb pad to select whether to display

DivX external subtitles or not.

! ORIGINAL – Display the DivX subtitles

! CUSTOM – Display the DivX external subtitles

Notes

! Up to 42 characters can be displayed on one

line. If more than 42 characters are set, the

line breaks and the characters are displayed

on the next line.

! Up to 126 characters can be displayed on one

screen. If more than 126 characters are set,

the excess characters will not be displayed.

Setting for digital output

Audio which is outputted from digital output of this

unit can be selected. Normally, set to STREAM.Ifthis

unit’s digital output is not used, there is no need to

change settings.

! Selecting Linear PCM enables you to switch the

output channel if playing the followi ng type of

discs. (Refer to LR SELECT (audio output) on page

20.)

! Dual mono mode DVD video discs

! Bilingual DVD-VR discs

1 Move the thumb pad up or down to select IEC DI-

GITAL OUTPUT in GEN.

2 Click the thumb pad to select the desired digital

output setting.

! STREAM – The Dolby Digital/DTS signal is

output as it is (initial setting)

! Linear PCM – The Dolby Digital/DTS signal is

converted to and output as a linear PCM sig-

nal

Section

Operating this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DVH-3200UB Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DVH-3200UB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info