Bedienungsanleitung Pioneer DVH-P4100UB (Seite 17 von 81) (Englisch)

502173

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

3 Turn MULTI-CONTROL to select the

function.

BSM (best stations memory)—REGION (regio-

nal)—LOCAL (local seek tuning)—TA (traffic

announcement standby)—AF (alternative fre-

quencies search)

Notes

! You can also select the function by pressing

FUNCTION on the remote control.

! To return to the previous display, press

DISP/BACK/SCRL.

! To return to the main menu, press and hold

DISP/BACK/SCRL.

! To return to the ordinary display, press

BAND/ESC.

! If you do not operate functions within about

30 seconds, the display automatically returns

to the ordinar y display.

! If MW/LW band is selected, you can only se-

lect BSM or LOCAL.

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1/S.Rtrv to 6/

1 Use MULTI-CONTROL to select BSM in

the function menu.

Refer to Introduction to advanced operations

on the previous page.

2 Press MULTI-CONTROL to turn BSM on.

The six strongest broadcast frequencies are

stored in the order of their signal strength.

# To cancel, press MULTI-CONTROL again.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Use MULTI-CONTROL to select LOCAL in

the function menu.

Refer to Introduction to advanced operations

on the previous page.

2 Press MULTI-CONTROL to display the

setting mode.

3 Turn MULTI-CONTROL to set the sensi-

tivity.

FM: OFF—LEVEL1—LEVEL2—LEVEL3—

LEVEL4

MW/LW: OFF—LEVEL1—LEVEL2

The LEVEL4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

# You can also perform the same operations by

pressing a or b.

4 Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been canceled before

determination, operation is settled.

Selecting alternative frequencies

When the tuner cannot get a good reception,

the unit automatically searches for a different

station in the same network.

% Press and hold TA/AF to turn AF on.

# To turn off, press MULTI-CONTROL again.

Notes

! You can also turn this function on or off in the

menu that appears by using

MULTI-CONTROL.

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station’s AF list. (This is only

available when using presets on the FM1 or

FM2 bands.) No preset number appears on

the display if the RDS data for the station re-

ceived differs from that for the originally

stored station.

Operating this unit

Section

Operating this unit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DVH-P4100UB Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DVH-P4100UB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info