Bedienungsanleitung Pioneer DVR-660H-K (Seite 48 von 145) (Englisch)

544415

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Recording

The recorder will automatically switch on

and start recording when the other

component comes on. Recording stops

when the external component switches off.

• To cancel Auto Start Recording, press

 STANDBY/ON while the recorder is in

standby. The AUTO indicator goes off.

• To cancel Auto Start Recording once

recording has already started, press

 REC for three seconds (this cancels

Auto Start Recording, but recording

continues), then

F STOP REC to stop

recording.

•You can also stop recording by pressing

F STOP REC then selecting Yes to

confirm.

Tip

•Alternatively, with no OSD displayed,

press and hold the front panel

F STOP REC button for more than three

seconds to switch Auto Start Recording

on directly. After switching on, switch

the recorder into standby.

Additional information for cable/

satellite/STB (set-top box) users

The following instructions show how to use

the timer features of your STB with this

recorder.

Setting up

1 Connect the STB’s audio/video

outputs to a set of audio/video inputs on

this recorder.

2 Switch on both the STB and this

recorder and switch the recorder’s input

function to the STB (L1, L2 or L3).

To check that everything is connected

properly, switch on your TV and select this

recorder as the video input. You should see

whatever the STB is tuned to.

3 Program the IR controller supplied

with your STB to send start/stop

recording codes for a Pioneer VCR.

See the manual that came with the STB for

how to do this.

Only the REC and STOP codes have any

effect when used with this recorder:

• REC – Start recording

• STOP – Stop recording

4 Position the IR controller so that it

will control this recorder.

The IR sensor on the recorder is located just

above the  mark on the front panel.

Making a timer recording

1 Set the timer on the STB.

See the manual that came with your STB for

how to do this.

2 Switch on this recorder.

You must leave the recorder on until the

recording finishes.

•At the programmed times, the STB will

start and stop recording on this

recorder.

Playing your recordings on

other DVD players

Most regular DVD players can play finalized

discs recorded in DVD-R/-RW (Video mode)

and DVD+R discs. A number of players

(including many Pioneer models) can also

play DVD-RW discs recorded in VR mode,

finalized or not. Most players will not play VR

mode DVD-R discs, although some

DVD-ROM drives and DVD recorders may be

able to (finalization might be necessary).

DVD-RAM discs can only be played on

DVD-RAM compatible players. Check the

manual that came with the player to check

what kinds of discs it will play.

When you finalize a DVD-R/-RW (Video

mode) or DVD+R disc, a title menu is

created from which you can select titles

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM

DVR660HK_KC_EN.book 48 ページ２００８年２月７日　木曜日　午後２時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DVR-660H-K Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info