Bedienungsanleitung Pioneer FH-X820BS (Seite 14 von 88) (Englisch, Französisch, Spanisch)

574470

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

14En

NOTE

TuneStart is compatible with SXV200 or later tuner models. Not compatible with SXV100.

TuneScan™

Scan through short previews of songs you may have missed on music channels stored

on the current band of presets.

Each song in the current channel plays for six seconds at a time.

For details, refer to TUNE SCAN (scanning the songs) on page 16.

NOTE

TuneScan is compatible with SXV200 or later tuner models. Not compatible with SXV100.

TuneMix™

Create a music channel that’s a blend of songs made up from the music channels stored

on the current band of presets. For details, refer to TUNE MIX on page 16.

NOTE

TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or

SXV100.

1 Press SRC/OFF to select [SIRIUSXM].

2 Press / to select Channel 0.

The Radio ID appears on the display.

In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle

ner.

NOTE

The Radio ID does not include the letters I, O, S or F.

3 Activate the SiriusXM service online or by phone.

For US Subscriptions:

• V

isit www.siriusxm.com/activatenow

• C

all SiriusXM Listener Care at 1-866-635-2349

For Canadian Subscriptions:

• V

isit www.xmradio.ca and click on “ACTIVATE RADIO” in the top right corner

• C

all 1-877-438-9677

4 [SUBSCRIPTION UPDATED] appears on the display when your SiriusXM Connect

Vehicle Tuner has been subscribed successfully.

Press any key to clear the activation message.

NOTE

The activation process usually takes 10 minutes to 15 minutes but may take up to an hour in some

cases. Do not turn off the unit until you clear the activation message in step 4.

1 Press /DIMMER, then select [CHANNEL].

You can also select the operation mode by the FUNCTION settings (page 15).

2 Press SRC/OFF to select [SIRIUSXM].

3 Press BAND/ to select a band from [SXM1], [SXM2] or [SXM3].

4 Press / to select a channel.

Pressing and holding either button will rapidly browse through the channels.

Press and hold either button then release to tune automatically. Scanning stops

hen the unit receives a station. To cancel seek tuning, press / .

Basic operations

1 Press /DIMMER to select the operation mode [CHANNEL] or [REPLAY].

NOTE

You can also make various adjustments in the FUNCTION settings (page 15).

Category scan

The live broadcast for each channel in the current category plays for six seconds at a

time. Follow the steps below.

To search for a channel from a list

1 Press during playback.

2 Turn the M.C. dial to select a category.

3 Select one of the operations below.

Category scan: Press and hold the M.

C. dial to switch to category scan.

Channel search: Press the M.C

. dial to tune into a channel.

Preparing for the SiriusXM Satellite Radio service

Listening to a channel

Purpose Operation

Select a channel 1 S

et the operation mode to [CHANNEL].

2 P

ress or .

Pressing and holding either button will

rapid

ly browse through the channels.

Skip backward/forward 1 S

et the operation mode to [REPLAY].

2 P

ress or .

Fast forward or reverse 1 S

et the operation mode to [REPLAY].

2 P

ress and hold or .

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer FH-X820BS Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info